Viewing all customer Discussions for:

39-109B 3/8" Handle for Pella

Can you help me get replacement for this crank hardware?

This Pella Casement window does not close properly. Does not hook on to lock. Crank mechanism is broken and missing the arms that connect it to window. No closure, except by hand on the inside of house. Up too high to close from outside. This window is lacking an upper lock as well. Thank you fi ... (cont.)

I'm looking to replace this with a foldable crank handle. Also need new operators for similar windows. These are ~30yo Pella's. Thanks

I am seeking replacement hardware for 4 Pella casement windows - IGCC CBA 3-97, IGMAC CIG-2. I hope to get all new cranks, locks, arms, etc.

I have a broken casement window operator. The only ID on the window is stamped on the sill track & is R 902 WC. This is an egress window and the dimensions are greater than the operator I've seen on this site. Photos follow - Thanks in advance if you can be of help.

Do you have that Bella crank handle ?

Hello I have some old windows and this one doesn't seem to work, I believe I need to get a whole new mechanism

Looking for replacement non-egress hardware for a 1987 Pella casement window. Need top and bottom operator.

There are no markings found on the part and I could not see anything on the actual window. It is the left side of a casement window and I need to order a new crank and handle if possible.

Looking for a replacement left hand window operator from the early 70s

I am looking to switch out to a t crank style. Hand crank is 3/8 x429

Hello, I'm looking for replacement parts for my Pella windows, which were installed in a home built in 1987. The window dimensions are 26 in x 71 in and 18 in x 45 in. I would appreciate your assistance. Thank you, Shawn

Our house was built in 1978, and we have crank-out Pella casement windows on our home's second story. We can no longer crank open one 30-1/2" x 40-1/2" window because the operator hardware is broken. You can see the broken gear in the posted photo. Is it possible to get replacement hardware for this ... (cont.)

Hello, we just recently bought a house that has 10 or more windows that I need to replace the cranks for. I'm trying to figure out how I know the size. I've enclosed a picture and I could certainly get more if needed. I don't see a brand on any of the windows as it's an older house and they've bee ... (cont.)

The housing for the gear mechanism where the handle meets the linkage is cracked so the window won't close the final Inch. Can you help me identify the part I need? Thanks!

This is from an old 1990s era casement window. The holes are about 3.75" apart.

I need to replace a 30 year old Pella window crank with a folding window crank so that blinds will fit on the window. The existing crank handle has a "X428" at the bottom of the existing crank. Thank you

I have both LH and RH opening windows that need complete hardware replacement. (Both open in opposite directions.) Looking for new opener hinges as well as the crank mechanism and the handle for each. One of the photos has approximate dimensions. I haven't disassembled it and taken pictures yet. ... (cont.)

Please confirm the Swisco replacement crank mechanism for a 1975 Pella wood casement window, 27" x 73". Also need the hinges and lock mechanism

Looking for bottom hinge. Showed part from other window. 2 screws to attach. If set is required, OK.