Viewing all customer Discussions for:

15-180 Coil Balance Shoe

Hello I am looking to replace the left and write balance from my window. Do you guys carry these? Thank you

Have Capital double hung replacement windows that were installed in 2000 - bottom vinyl sash is 28 in. wide and 22 in. high. Window coil balance springs snapped on two windows and the coil springs are 1/2/in wide. If better photos are needed let me know.

After some googling, it seems the part I need will be the coil and support for Capitol windows.Thank you.

Need new coils for a few top and bottom windows not sure if that matters they look identical,

Need help on this window balance for replace?

Having a hard time tracking this part down just hoping for some type of direction

Having a hard time tracking this part down asked a few of my contractors can't seem to find hardware like this just hoping for some type of direction

The sash is 27 wide by 32 high. Only label is pictured.

Hi Enclosed are photos of the part I am looking for to replace. SPRING FOR WINDOW BOTH SIDES. Hope you can help. Looking forward to your response If you need more please let me know. Windows are 20 years old. Vinal . The weight of the bottom window is 19

This part came out of a vinyl replacement window. it's a double-hung 30"W X 61"H.The only markings I saw was an H on the back of the paw (the part that holds the window) and the number 4 stamped on the coil.Any advice would be appreciated.James

I need one left hand and one right hand coil balance. It may be hard to see in the photo but the number "8" is stamped onto each spring.

I have upper and lower coil springs left and right side of window half inch thick no stamp number on spring small window that morning 5 lb

Bottom circular portion is broken

My window weighs 15 lbs and there is one spring on each side. The springs are 1/2' wide and have 932 stamped on them. Two windows are totally broken so I need four springs. Please see attached pics for reference. Thanks, John

hello, i am looking for the window balance part in the photo. I need two of them, one left and one right.

I need a replacement coil balance and pair of tilt latches for a window upper sash. The window sash is approximately 30in. tall by 24.5in. wide. Overall window opening about 64in. tall. The only identifying mark on the window is the number a-x7164 on the screen. Thank you!

The entire coil balance assembly has failed in different ways in multiple windows. Looking to replace them all. I think I have an S190 coil spring, but am unsure of the size. It's either a 6 or a 9 stamped into the spring, but I don't know which way is up! It's a 9 when looking with the screw hole a ... (cont.)

This is MI mtl-2 Series 3500 window built in 2005. A few of bottom windows keep dropping when opening. It seems the coil balance shoes are broken. I took the picture. Would you please take a look and please tell me what the part number is? Do you have the parts? Thank you!

Old windows. No identifier anywhere. I need to pull the existing corroded Pivot Bar to see what size, etc. However, looking to replace the coil and 2 other pieces needed in the pictures. Lack of knowledge to name each part. Sorry. Thank you

S. O. S. , I was told by a house inspector that I needed to change the sach balances of my glass windows. I have called window companies, went to HD Store, online, etc. , and can't find parts. I have Double hung 8500, made on December/2003. I will include pictures below. Please, tell me the right p ... (cont.)