Viewing all customer Discussions for:

15-180 Coil Balance Shoe

hello, i am looking for the window balance part in the photo. I need two of them, one left and one right.

I need a replacement coil balance and pair of tilt latches for a window upper sash. The window sash is approximately 30in. tall by 24.5in. wide. Overall window opening about 64in. tall. The only identifying mark on the window is the number a-x7164 on the screen. Thank you!

The entire coil balance assembly has failed in different ways in multiple windows. Looking to replace them all. I think I have an S190 coil spring, but am unsure of the size. It's either a 6 or a 9 stamped into the spring, but I don't know which way is up! It's a 9 when looking with the screw hole a ... (cont.)

This is MI mtl-2 Series 3500 window built in 2005. A few of bottom windows keep dropping when opening. It seems the coil balance shoes are broken. I took the picture. Would you please take a look and please tell me what the part number is? Do you have the parts? Thank you!

Old windows. No identifier anywhere. I need to pull the existing corroded Pivot Bar to see what size, etc. However, looking to replace the coil and 2 other pieces needed in the pictures. Lack of knowledge to name each part. Sorry. Thank you

S. O. S. , I was told by a house inspector that I needed to change the sach balances of my glass windows. I have called window companies, went to HD Store, online, etc. , and can't find parts. I have Double hung 8500, made on December/2003. I will include pictures below. Please, tell me the right p ... (cont.)

WHEN HOLDING THE SPRING WITH THE MOUNTING HOLE ABOVE THE NUMBER. THE PART SHOWS A #9 STAMPED INTO THE SPRING WHEN THE MOUNTING HOLE IS BELOW THE NUMBER. THE PART SHOWS A #6 STAMPED INTO THE SPRING BOTH SIDES APPEAR TO HAVE BROKEN INTO 2 PIECES PER SIDE

The spring is 1/2" wide

Attn-Swissco,I need to replace 2 window balances in my single MI bathroom window that is 21 inches in width and approx. 17 1/2 inches in height for the lower window. I have provided a order sheet from the regular windows that I replaced in 2019 from the MI 8500 series which were slightly bigger tha ... (cont.)

Window sash weight is 15.3

The first two pictures are the broken pieces attached to the window frame and the third picture is a complete piece from another window.

Window will not stay opened

Thank you for this service! Home built in 1978. Two windows do not stay open and I believe it is due to snapped ribbons. One window measures 29.5 in x 20 in. The other is 21.5 in x 17.5 in. Attached coil system photos are from the smaller window. I can not locate any markings on the windows or frame ... (cont.)

Need 2 of these

Hi. I need to replace the entire spring/coil system on one window (case and foot as well) for both sides of the window. The weight of the sash is 16lbs. Can you please let me know what parts I need to order. Thank you, Melissa

Hi, my window won't stay up. Can you tell me what part this is?

I need to match these

I need to replace the balance hardware for my windows but cannot provide the brand or part numbers any longer as the store went out of business years ago. I was not able to find parts that looked like the ones in my window.

I am looking for the vinyl window part shown in the attached pictures. The only markings I see is the letter "E". Thank you.

What pivot shoe and jam track do I need for MI window 16404694.1 Also what size pivot bar