Viewing all customer Discussions for:

15-182 Balance Bushing

Please help me indentify the tape balance in the pics. This is for replacing the coil in the balancer of a double pane window. 24"×16". Thank you.

can someone please help me identify the name/part number? At this stage, does the whole spring unit need to be replaced, or does this little plastic cracked piece usually resolve the issue?could i have part number for both?thank you

The hardware pictured above needs to be replaced from both sides of the same window. The only identifying markings I can see is that the coil has a "7" on it and the two plastic pieces have a "G" on one side and a "A" on the other. The sash itself appears to be approx 23" tall. It's a standard vinyl ... (cont.)

Pin replacement to sliding guide. 1st pic shows pin missing.

Can you please help me identify the part numbers for window balance shoe and coil (with coil case) for WI Windows and Doors brand model S3500CHS window that's 36" x 74" and is labeled with manf ID # 1260653.3 Thanks very much

Hi, I think I need the 15-177 coil balance shoe, the 15-144 coil bushing cap, the 15-145 coil support barrel and the S152-7 7 lb 152 series coil balance (the current one is stamped 7) and 33-072 Philips screw. 2 of each, but I’m concerned that the shoe may be too wide (the current one measures ... (cont.)

I am looking for a coil balance pivot shoe like the one pictured. Specifically, if possible, I just need the cam for the one that is missing. The shoe is about 1 3/4" tall and about 1" wide. This is a duplicate post because I gave the wrong email address and accidentally hit submit before I could co ... (cont.)

Both window balances are missing, so I do not have a picture of what I need.

1/2" wide, imprinted 932

Need to replace two of these. I can see the spring has an 8 on it. Spring are actually broken but would prefer to replace the whole unit. Thanks

Only # on coils is 632

I have a damaged sash spring apparatus that no longer will grab the pivot bar of the window. Im looking to replace it. I dont have the brand name of the window, but did have the majority of a sticker on one window still attached/legible that has the manufactirer code and presumably a window model. ... (cont.)

I am needing to repair a bunch of windows that do not stay up. This is the part that slides into the side of the window frame. There is one on each side. The pin piece is Alison broken.

The Coil /band is stamped 832, 1/2" diameter, window weighs 20lbs.

The window sash is 36" eac

Hello, I need help replacing this item. It's 4 inches tall. 1 inch width. The bottom part has broken off. Thank you.

This is the spring balance. As you can see the housing is broken. I need help finding this part.

My window does not stay up...keeps sliding down. I saw the broken parts and coils. I think I would need the sets of coil balance accessories. I found the letter saying "Duraseal" on the window seal but not sure if it is related to the parts. Could you be able to help me to identify the parts? Thanks ... (cont.)

This is a 23 year old single hung builder unit likely Champion or similar. Window is 32x48 and I think 15-186, 15-180, S190-540 look right but no sure. Please help

I just submitted a request to help I dentify a part, then I found this page on your web site that enables me to upload pictures. Sorry for the duplicate request. Have MI Windows manufactured on 2/9/2006. The coil spring is 1/2" wide, and the bottom window that it is attached to measures 35"H x 33.7 ... (cont.)