Viewing all customer Discussions for:

81-098 Pella Patio Glass Door Roller Assembly

Question: I have a Pella Wood Sliding door purchased in 1995 I would like to replace the rollers. PART Number on Pella Receipt is: 1F/DFXO26 1F/DF012 Can you recommend a roller replacement part? also Do you have a video or instructions on how to replace? Thanks Joe

Our pella sliding glass door was very difficult to open and close. Went with the 81-098 original rollers after reading a few posts. Our order was in the mail within an hour and on our doorsteps the next day. Followed this sites directions for installation and our door slides like a charm. Don't be a ... (cont.)

Require 2 new roller assemblies. What do you recommend I replace them with?

It appears either the 81-098 or the 81-244 is what I need. How can I tell the difference in what I have. I need stainless steel due to salt water.

I need a new set of rollers for a pella sliding door. It is an older wood/aluminum clad model with blinds between the glass. I want to be sure I'm ordering the right rollers. I have attached a few photos of the roller and door to help identify. There are no visible model or serial numbers on the doo ... (cont.)

Hello, I have a house built in 1987 that has a "between the pane" blind Pella patio door. Pella said it was a Designer Series. Which set of roller do I need as the old ones are worn out? Thanks, Jack

I ordered and received two Pella #81-098 patio door roller assemblies in April. They work beautifully and are of the highest quality. I replaced others that had been installed by a non-Pella dealer. I am in a dispute with this local window company who, I feel, cheated me and put in worn rolle ... (cont.)

any big difference, besides price between, 81-98 and 81-249? one is pella and the other generic. is it worth it for best function to go with pella? i don't want to be less than thrilled after replacing.

I believe its the old style but just checking to make sure. Thanks much. Please verify so I can order. I probably want the less expensive one. I am old! lol Thanks, Linda

Looking on your website I want to confirm the replacement Roller for our sliding glass door. I would guess this is the old style since the door is at least 12 years old. I see two different kinds on your site and want to understand if there are quality differences. Thanks, Charlie ... (cont.)

I have a Pella Sliding Glass Door that need the rollers replaced (one side is bad) and the small knob to lock the door is broken. The house was built in 1982-1983. From your web site, I believe the roller assembly the I need is the 81-098. I have attached pictures of the small knob I need for loc ... (cont.)

My house was built in the 1987/88 timeframe. I have a Pella sliding glass door with worn roller assemblies and worn nylon/plastic parts. The roller replacement part here at Swisco has product code 81-098. I need identify the other worn out parts. Attached is an image of one of the two white ... (cont.)

Hello Mike, You asked if there were any model or serial numbers I couldn't find any but i was able to remove the roller and took some pictures.If you can tell me what rollers i need ,i will be able to oredr them Thanks For your help Rich

Hello; I have what appears to be the same unit as pictured on your site as "Pre-701" (Pella). The dimensions on the assembly are similar, but the height of the unit is 2", not the 1 11/16" as the 701. There are no dimensions given for the wheel itself, but mine is 1 1/2" diameter,3/8" width and w ... (cont.)

I am preparing to order Glass Door Roller Assemblies from you. Our Pella Sliding Glass Doors were purchased and installed in Aug 1980 Your online catalog seems to list two roller assemblies as suitable replacements: 81-098 and 81-249. Other than cost (the 81-249 is about half), what is the dif ... (cont.)

Does the 81-098 Pella sliding glass door roller come with the screw shown in the image above?

Would the 81-098 roller also fit the Pella 806CS patio doors (circa 1985-1987)? That's the only "number" on the door/frame I can find. If not, is there another part that would fit it? I didn't want to take the door out of the frame until I knew for sure. The roller is really messed up at this po ... (cont.)