Viewing all customer Discussions for:

36-078 Shoe Stud

Looking for a replacement or something close for this

Swisco previously helped me with another casement window part with my order# https://www.swisco.com/page-ords?Order_ID=2203953. That window is now working perfectly. The current problem window needs the operator replaced. I haven't been able to open it but I know that it is another "Truth" window ... (cont.)

Replacement operator

Weathershield no longer supplies hardware for the Custom Shield Awning windows, I need both the crank handle & the cover attached to the window replaced. Qty. 4 Do you have anything that would work? Thanks!

Truth 40747

Slide adapter from end of the actuator arms. Need adapter and retaining clipParts lost after having window AC in place of glass window.

Hi, I believe I need 39–348 based on the attached photos and the width of 24 inches. Two of the screws lineup roughly 2 inches apart, but I can't see the other two screws because they may be hidden by the arms. Can you confirm that they are about 4 1/4 inches apart? It also appears that I need ... (cont.)

please advise if you have the full part with all the parts

Crank can open window but doesn't close window. Wondering whether any of your awning cranks would work.

The crank handle of an awning window has come out and cannot seem to stay. The crews may be stripped. The window is original to my house which was built around 1991. We plan to replace all of the windows but I would like to limp along a bit more with this one. The only numbers or lettering I fou ... (cont.)

House was 4 yrs old when we bought thus 1988 built. The Sill is wood but might have thin plastic cap full width however I can not remove screws that hold the handle mechinizum under sill, 4 -6 screws. Thinking about removing ~ 1/4 inch thick piece of sill above mechinizum so as to access srew heads, ... (cont.)

Hi. I recently moved into a new place and several of the windows do not function properly. Some of the cranks do not function at all, some of them will open the window but will not close the window, most of them come apart when trying to use them. The handles themselves seem to be fine and the mecha ... (cont.)

Hello - I'm looking for some old Kolbe & Kolbe awning window parts. House was built in the early 90's. Need the guide bar track (1 @ 26 1/8" long and 1 @ 26 3/4" long) that screws to the bottom of the sash. Also need the brackets that slide in the guide bar track that clip to the arms. And... ... (cont.)

Hi, With pics attached, Is your product 39 - 312 the correct replacement for this application. The connections and crunch look a little different. But I may be able to work with your 39 - 312 if this looks good from your experience, Craig

Hola necesito unos roto operador para remplazo, son antiguos de ano 2000 te envio numero de partes: AB Izq. 4.241.541 Marca Verdad hijo 8 AB Der. hijo 4 AB Proyeccion N? Part. 4505601 son 8 Entry Gard serie 15 espero que me puedan ayudar gracias saludos

the mechanism has stripped out and I am looking for a replacement

Hurd casement window, dual arm, 9" arms. Need replacement.

Left arm is stamped truth 40011, right arm 40012. Looks like I will have to remove the wood over the mechanism to access the screws mounting the mechanism to the sill. Looking at product code 39-348. Is that correct? Will I also need the operator cover 39-107?

Entry Gard # 40759. Double arm. Installed unit appeared to have to have 'end caps' Missing. The part that engages the slide mechanism

My hardware that needs replacing is Truth 40012 marked on both arms. The areas are 11 inches, the bar across the top is 27 inches and the handle base is 5 inch. What do you suggest? Thanks