Viewing all customer Discussions for:

26-352 Pivot True Pivot Bar

Need help getting equivalent replacement parts, I ordered the 15-177 slate blue replacement shoe only to then realize the plastic bushing parts around the spring was a mess too. Also realized I had some broken t bars also.

Hi. I can't a pivot bar carrier with the same dimensions as the picture above or the pivot bar. Can anyone help me out please. I've tried the pivot bars and carries 26-398, 26-405, 26-237, and 26-236 but none match hole placement in my windows.

I'm replacing broken pivot pins, shoes and coil covers. Can you help to infirm that parts I've selected are all compatible adn how to find the coil bushing.coil cover assembly in my pics. Many thanks, Tim

We have 7 windows that are to tilt in and they are loose and do not catch to tilt. We need the pins to hold them into place. Please advise type of pin we need for these windows.Thank youDiana

We need some window balancers and shoes . Need help to get parts A few bottom shoes have broken and need some new balancers. I'm sending you some Pictures .they are Jeld-wen windows not sure what you need to get correct parts

I need help identifying which replacement pivot bar I need. I have attached photos of a good one. It is 2 inches long and 5/8 inch wide. Any help is appreciated as I didn't see it when I browsed your site.ThanksNeal

I need a 2 inch true pivot bar. Might you carry them, and I just didn't type in the right thing?

I have trouble finding this pivot bar and do i need to change the coils cause the slider in the open position is hard to go up and down.

Need replacement hardware for KVw tilt single hung 20+ Years old can you help? Looking for complete repair kit for these windows.

Do you carry this part

I need the replacement parts for these items. Any help in this matter is greatly appreciated. Ty!!

Please provide matching pivot lock for photos provided the existing pivot lock shoe measures 2-1/8" x 1-1/4" x 13.6mm below brake and 16.4mm measuring at or including the brake which is brown. I have included photos of the window pivot bar also which doesn't appear to be removable. The pivot lock lo ... (cont.)

hi, i would like to know if you have this item in stock

I HAVE A COUPLE WINDOWS THAT HAVE THESE BROKEN PARTS. I AM UNABLE TO LOCTE THE MANUFATRUER ON THESE ANYWHERE VISIBLE. THEY ARE ABOUT 20 YEARS OLD NOW AND POSSIBLY MADE BY VINYLBILT?

couldnt find any part numbers but on the flat surface there is just the number "8" engraved in a circle on the part

I have 2 small and four large double hung, tilt windows that need new balances, pivot pins and latches. The balances are coil spring valences that have "8" stamped on the single coil for the large windows (upper and lower) and the smaller windows have a "6". You can see all in the photos. Most of ... (cont.)

We need one of this pivot bar. Do you have it?

Please help identify these window parts so I can order the correct ones.Thank you , Scott

I think they are Great Lakes - Plygem double-hung parts

you have 2 parts that look similar. 26-226. and 26-352. can you ID which will work?