Viewing all customer Discussions for:

33-079 #10 x 1" Flat Head Philips SS Screw

Hi, I need to replace the left and right side, could you please tell me what do I need to order. Thank you

Hi, I have two roto operators that have failed. Both are marked EntryGard Truth. Both have smaller arm length of 4.5 inch and longer arm length of 9.5 inch:Right roto operator has 20810Left roto operator has 31538If you could let me know what parts to order, I would appreciate it. I also need a new ... (cont.)

I can tell this is a Truth operator as it has their logo on the arm. However, there are no part numbers and all the replacement ones I've seen are slightly different. I'd hate to spent money and the unit not be correct.

The window opens fully but it won't close. I was under the impression that the Sprocketts ( not correct name ?) but the (Screws) were worn out and so the crank can't engage with the ( whatever it is called.

Home built in 1988. original hardware

Looking for a replacement (both left and right handed) for this. It is stamped Truth and also has a number stamped 45251. The cover appears to be permanently attached and is 4 inches accross

I'm looking for a pair of window cranks

Hi, I believe I need 39–348 based on the attached photos and the width of 24 inches. Two of the screws lineup roughly 2 inches apart, but I can't see the other two screws because they may be hidden by the arms. Can you confirm that they are about 4 1/4 inches apart? It also appears that I need ... (cont.)

The crank handle of an awning window has come out and cannot seem to stay. The crews may be stripped. The window is original to my house which was built around 1991. We plan to replace all of the windows but I would like to limp along a bit more with this one. The only numbers or lettering I fou ... (cont.)

Cranks are striped- don't turn. Silverline window in kitchen installed 17 years ago. Numbers on underside= Right crank 5053, Left crank 50T3.

Short arm pivot to pivot ~ 3-15/16" Long arm pivot to pivot ~9-1/4" Surface mount block size = 3-1/2" x 2-1/8"

Need new crank. it has part numbers: 45135 crank body 40352 arm 20810A extension

Hi. I recently moved into a new place and several of the windows do not function properly. Some of the cranks do not function at all, some of them will open the window but will not close the window, most of them come apart when trying to use them. The handles themselves seem to be fine and the mecha ... (cont.)

I'm guessing that the originals are no longer manufactured. It looks like there are a few possible options on your wesbite, but hard to tell which would work if at all

it says truth. on the arm 20545. also says 30905 I also need a white crank

Need to replace this Truth 45251 window crank mechanism. Can you help?

Will need L & R

Hope you can help me with this operator. White Truth operator. As per diagram, the swing arm that connects to the sash is 4 1/2" on center and the mounting clip is on the bottom. It also has a upward bend.

Are you able to identify these operators?

Looking for replacement hardware for two (left opening and right opening) Norco window crank openers. Not sure how old these windows are. The hardware is marked "Truth Entrygard". Not sure these match your part # 39-031 and 39-032 as the shorter arm, stamped 20755, measures 3 7/8" and said part actu ... (cont.)