Viewing all customer Discussions for:

39-529 Truth Hardware Track Slider

Hello. I am in need of the piece found underneath a jeldwen crank out window. Its the piece that the arm connects to the bottom of the window with. See image.

Need proper mechanism to replace crank mechanism. Customer needs to be satisfied.

Hello, I have one broken window handle that snapped off and another window handle that was missing in the home we moved into. They both appear to be different. There are no markings on the one with the missing handle. Inside the casement of the one with the broken handle it says Truth Hardware. The ... (cont.)

I need to know if you have these parts available

Could you please let me know which operator I can use to replace my existing one? Will I be able to reuse my existing cover and handle?

I need to replace the crank mechanisms in 8 windows and the parts I ordered are incorrect. The parts from the window are pictured.

The operator jams at the last 1" position when closing preventing the window from fully closing. If I use force it feels like the gears are slipping. The operator was made in 2001 and the part numbers I see are as follows: - straight arm 41011 - swivel arm 31876

I need this part Truth dual arm closer 31876

Truth. 30744 These are the markings on the crank.

Hi there, I am looking to replace the casement operators on seven windows: two left-handed, five right-handed. I also need to replace some hinges. I have my questions organized at the end of this email.The measurements marked in the pictures are from end-to-end. I had trouble getting an exact measur ... (cont.)

I need to replace the operators for the casement windows for my house which is in a coastal environment. I believe the operator pictured is a left-handed Maxim dual arm operator. Is that correct? If so, I believe the Encore series replaces that. If I have that correct, a few questions: 1. Are ... (cont.)

Hi, I am looking for the attached TRUTH Split Arm Operator, can you help identify? Numbers found: Parts# Top 060299 01:13 MADE IN USA Parts# Arms 31876 41011 40448

Hello, the wheel/roller on the end of the arm is broken. Don't know if you can just get the wheel or if you have to purchase a whole new unit. The arm is about 9" in length and the channel on the window is about 14.5". Can you make a recommendation?

I think this is A Jeldwen casement handle the solid bar is 10"s the pivot arm is 5"s to the pivot point. the pivot to the end is 4.5"s long. do you have this part in a white finish ? I tried to attach picture not sure if it did though.

window cranks to open to the left, crank itself is stripped

We are looking for this part for a casement, CO11-0704 thanks

Hi Swisco - attached photos show our bathroom casement window, with crank opener mechanism. Window was installed in 2001. I am not sure what brand was used by the contractor - maybe the label helps? I removed some corrosion a few years ago and spray-painted the mechanism (beige), but it looks like ... (cont.)

Hi there, Can you help me find a replacement window operator? The ID number on the back was 10309 08:08 A, and the one on the arm was 40110 C 3. Thank you, Magali

Looking to replace four Thermal-Gard Truth casement cranks. Can you please help me identify the replacement part number. Thank you.

I have a casement window approx 46"X33"X3". The parts are rusted, broken. I need the following pieces: Pic #1: The crank operator housing is 5" in length; the gear of Crank Op w/ 2 extending arms, (1 straight, 1 bent at elbow), sits atop silver plate 5" long secured with screws 1.5" apart. Btm ... (cont.)