Viewing all customer Discussions for:

33-081 #10 x 1/2" Pan Head Phillips Screw

I have attached 3 window crank pictures and a hand written picture of the logo and numbers printed inside the handle casing. The part number appears to be 11500-3 2 RH. Paten number appears to be D-198, 202 U 8. RD 1963 CAN. I need at least one replacement casing and hand crank, preferably 2 ... (cont.)

I trying to figure out which one to order. The Part measures 6" in height.

Our 4 pane awning windows are vintage 50 or 60?s. They were given to us and they have no brand on them , we need a right hand operator but can not find one, it measures top center to bottom center 4 3/4 and bottom center to center is 3/4, maybe you can help locate and identify this part, thank y ... (cont.)

I, too, have LEMCO Series 30 awning windows. I am looking for the LEFT HAND crank.

Help,Need this yale crank handle that connects with 2 holes. please let me know asap if you can help as my tenants cannot close the window and all the a.c. is going out in Florida.Thanks,Diane

I'm looking for a replacement crank assembly.

Hello, I bought an old apartment (1983) with original windows (uggggg) the majority of them work fine, they lock but there are a few that only one side the pin does not lock in the hook. They both seem to be in the right place compared to the other side that works so I am not sure what the problem ... (cont.)

Attached are pictures with dimension of operator I am looking for, need between 10 and twenty but want to get one first and make sure it works

I can't seem to find an operator the same as I have. Hopefully the photos with dimensions will help identify it.

Was supposed to have a 3/8 inch hole

I attached some pictures with measurements of my existing operators. Several have stripped/broken and need to be replaced. The windows are about 16 years old and I don't see any manufacturer tags which makes finding a replacement operator that much harder. Looking for several LH and RH operators, ... (cont.)

I need to know the correct replacement part ro order.

Hi, I have awning windows that are stamped/branded Pan Am, I uploaded a few pictures of the cranks that they used could you look at the picks and advise what type of replacements you have that could be used?

Good afternoon, I'm looking for two left hand crank assemblies to replace the type shown in the attached photos and drawing. I can send more if needed. Windows are circa 1979, all aluminum.

It measures 6 inches tall and 7/8 inches wide.

Hello, I'm trying to find 7 replacement cranks for my windows. I just bought the house and it was built in 1953. The porch was enclosed after it was built. The cranks don't pull the windows shut anymore. Any idea as to what parts I need to buy? I was able to rig them to stay shut for now. Thanks s ... (cont.)

There is a number 73 on the bar.

Need to replace this with screws . It originally had a rivet that my husband had to pop out to take it off.

Hello! I have ten of these windows that are showing their age. I've looked everywhere for any type of markings and I can't find any. I saw a video where a guy replaced similar windows on his Airstream and said the model number is usually on the lower left exterior, but mine has nothing. I need ... (cont.)

Similar to the customer who posted back in sept. 2017, I am in need of a replacement for my 1717r awning crank. After taking all the dimensions I purchased your 39-025.... but it was a no go ( picture attached). I would greatly appreciate a call so that we can figure out which one I need to purchase ... (cont.)