Viewing all customer Discussions for:

33-081 #10 x 1/2" Pan Head Phillips Screw

Need a new operator for this really old awning window. Top to bottom mounting hole distance 5 1/4" bottom holes distance 1 1/2" Operating lever 2 1/2 " center pivot holes. 2 pictures attached

Do you nuts to fit these screws? #10 x 1/2" Pan Head Phillips Screw My aluminum window frame hole for the window crank has stretched and is stripped I need to bolt it on now. Thanks.

I assume I need a rh version of 39011 my demensions are vertical holes 41/4 horizontal 1 1/8 bar is 2 1/2 between holes any help would be appreciated

Crank just spins and Spins window doesn't open or closed

the measurements all seem to match. question about the 3/8 hole- mine is threaded to accept threads on bolt/screw. Are there threads in that hole? if not I possible could do a work around or less you have the exact match.

I need 2 crank assemblies for awning windows Plus screws for outside 2 leverWould you carry this crank assembly and if so I would like to order 2 and 2 outside screws for the lever

1. I am looking for some white crank assemblies like in the 2 pictures above. Screw holes 5 1/4" on center 2. I am looking for aluminum tabs to hold screens in place with screws like picture above. 3. I am looking for aluminum covers for hole in aluminum frame like picture above. ... (cont.)

Trying to figure out what replacement part I should get for this awning operator? And how to install...in your video it looks like there should be a screw to remove but it does not look like a screw?

Take a look at our 39-011 and 39-012 operators, compare the dimensions of our parts to that of yours, and see if these will work for you.

I need to replace the crank handles on 5 of my jalousie windows on my back porch. I also nee to replace 4 panes of glass that have moisture in them. I cannot find the name of the he windows any where on them. The windows were here when we bought the house so I think they are about 20 years old. Do ... (cont.)

Hello,WE'd be happy to help but it's tough for us to narrow down your replacement options without seeing the arms that move the window. We'd have a much better chance of finding the correct replacement for you if you could show us a picture of the operator removed form the window with a clear view o ... (cont.)

No markings Old aluminum double window Glass is glazed in

Hello, I have a house with many of these operators that need to be replaced. Your help identifying the correct part is greatly appreciated. There is no brand name or info anywhere to be found on the window. The photos attached show what I can see and measurements are there. Please let me know i ... (cont.)

I have LOOK window cranks. I need replacement crank and the screws to muon to the casing. thanks kenny

Hello. Hopefully you can help. My wife and I live in a condo in Honolulu?Villa At Eaton Square. I am attaching two photos. I need to purchase one window crank. Can you tell from the photos which one we need (I saw a reference to a 016, and a 017, but I don?t know which is correct)? Thank you ... (cont.)

There are no markings at all on the crank assembly. It came off a Jalousie type window. Any help would be appreciated. If you have them, I would buy them from you. I need around 8 or 9. They are for my sons sun room windows off the back of his house.

I need a replacement operator that will last. The ones that I am buying from home Depot don't fit right and they don't last. The picture of the brown operator is an original one that is more than 10 years old and still works great. I need a replacement like that one. Also, I need oversized screws. ... (cont.)

Please let me know what other photo angles or information I can provide.Measurements:casing: 150mm X 50mm X 25mmtwo hole base: 59mm X 22 mm, screw holes 7mmswivel arm: 69mm X 15mm, hole diameter 12mm.

My window crank operator looks similar to this one, but my dimensions are 2 3/8? instead of 2 1/4? and 1 1/8? instead of 1 3/16?. Do you know if it will still fit? Is there another operator that will work better? Thank you.

Hi! I recently bought a house built in 1969 and I think the crank may be original. It is a Pan Am and it might be 6007 for numbers on it. The crank part does not close the window now and I'm trying to replacing the entire crank so that I can operate the window. It is a right side window crank.I obta ... (cont.)