Viewing all customer Discussions for:

33-081 #10 x 1/2" Pan Head Phillips Screw

After many tries I found the only window crank that fits exactly over the holes on the frame from the old crank. It is a Stanley operator, BUT as you see on the photos the bracket is slightly separated from the window part, and the worst thing is that there nowhere to screw the shoulder screw. There ... (cont.)

Unable to find replacements at any local stores. Can you help me out? Thank you. Gabe

Hi. This is the type of Awning Window operator I need (this is a different window but the other is also "right side" and suffered from the same corrosion but broke)I am in Hawaii. Thanks!

Our older 3-season porch has a few awning cranks not working, the one pictured handle broke off. The bottom two screw holes are 1 1/8" a part, the top to bottom screw holes are 5 1/4" a part and the elbow to end of arm is 2 3/8" long. Does the 39-025 come with all screws needed to attach back to w ... (cont.)

Patio window operator No part number on it

I have a awning crank operator that has machine screws that aren't doing a very good job of holding the crank securely against the window. Seems like the window's holes are a little to large and there's nothing for the screw to grip onto. I removed a screw from a neighboring window crank, and it w ... (cont.)

I ordered the 39-026 and it was very close but I need a different end. to attach to the window. Hopefully you can find it I attached several photos of the one I need.

This is the part that is on the side of every window pane frame that projects from the edge of the frame that when you close the window sits under the claw in the mechanism and locks the window as the crank is turned and draws the window up and in.

I need a bunch of the cranks and these other parts for my windows. I have measurements. Can you confirm what I think I need? Tim

I need this ASAP. I have sold my house and this repair is on my inspection list

I just received my RH Awning Operator (3/8" hole, Part # 39-419). With it there are several parts to link its arm to the arm of the awning window, including a 5/16" Shoulder Crew, 1/4" - 20 Thread (Part # 33-070). Also included is a #10 X 1/2" Pan Head Phillips Screw (Part # 33-081). What I need ar ... (cont.)

I would like to purchase is window crank for one that is not working well. I believe the Lenehan would work, you can tell me.A window crank just like this one that is not functioning.I also need all the supporting hardware screws what have you that would be needed to install the window crank.I look ... (cont.)

Hi, the screw which connects the operator arm to the window arm ??? has broken off and I cannot unscrew the head it is rusted on.The remainder of screw is in arm. No part numbers I see a 91 on pivot head Please, I need new part and connecting screw and strength to take off rusty head ... (cont.)

I am hoping to restore some windows. I know little about window repair, to state the obvious, so I am hoping for your help. See attached photos 6 photos. 3 of which general photos which may help you identify the window. I will need operators (See photo) I will need bushings (slide bar guides) and ... (cont.)

Need replacement left and right awning window crank operators. Cannot locate brand on device but found a patent number (2732726). Please advise.

Greetings! My name is Tina Trousdell. My house was built in 1989 and the whole house has Pam AM windows with 11500-11 Pam AM cranks. The right window crank broke several years ago on one of the larger ones. (photo attached of the left side of the same window). The number on the crank is 1150-11. In ... (cont.)

10-8201 stamped inside of assembly. I assume this is called a right hand crank? I would like to order one right hand crank assy. And one left hand assy. If they work I will order about 15 of each right and left assy.

Hi, I have an old window crank with three screw holes. Your Pan/Am Daryl Window Crank looks similar except the screw holes do not match. Attached photos show my crank with a single screw on top and two screws, diagonally apart, on the bottom. Can I use your crank or do you have something that matche ... (cont.)

-as shown in pictures: The part that moves with the handle) is shaped to curve facing up. My original handles all have that part curved to face down. When my original part is closed nothing sticks out. When the 39-026 closes there are gear teeth sticking out and because of this I just can not close ... (cont.)

Body is very similar to a Barton Kramer model #780. inside of crank handle is PAT NO C-11500-11. Inside body is D-198202U. Below that is RD 1963 CAN. Also a large square with numbers 92 and lines radiating out to corners of square from numbers. Unit was used to operate louvered tropical windows. Att ... (cont.)