Viewing all customer Discussions for:

33-081 #10 x 1/2" Pan Head Phillips Screw

Hey, I believe this is the same brand so I'm reaching out to see if yall have a replacement crank operator like this one. Thank you!

Hello, I’m looking for a replacement operator to match this unit: Is it 39-025 & 39-026 ? Thanks, Bill

left hand operater with 4.5" widest hole spaceing

Hello! One of our window cranks has broken and not sure exactly what/where to replace. I've included photos. Please let me know if you need anything else, thanks in advance!

In the picture: TNO 198202 USA RH RD 1963 CAN

I need a right hand operator for louver windows. The flat connector arm is 2 7/8" hole to hole and holes are 3/8". Distance between lower mounting holes is 1 1/8" and the distance between the upper two holes is about 7/16". The vertical distance between the lower and upper mounting holes is about 5 ... (cont.)

I don't know the manufacturer of this window, so I'm hoping that Swisco has an operator that will fit. The window could be as many as 50 years old or older.

I ordered 39-060. But it doesn't sound right

Hi! I have jalecy windows. They crank open. The handle broke and just kept turning and window wouldn't close.

1994 crank windows. White Right handed crank. How find correct part.? the crank box itself: height is 4.5 inches, depth is 2.25 inches, 1 inch width. distance between screw holes that hold it to window frame : top to bottom 5.5 inches, and width of screws holes at bottom are 1 ¼ to 1 3/8 ... (cont.)

Hand crank for 60+ year old house. Thank you.

What screws do I need for the above handle

Good Evening, if you could please help me identify this window crank. It looks alot like the 39-061. Except there is a metal shank riveted to the arm that connects to the window. There is also a metal sleeve that slides onto the metal shank. Looks to receive a 1/4" machined screw. I would be incredi ... (cont.)

I have not been able to identify the window manufacturer. No markings on the opener. I haven't removed the opener yet hoping to identify a replacement from the photos. It looks like the 39-017 might be correct? The other possibility is the 39-280? Thanks for any help

I need 5 left handed units " heavy duty" if available Please advise thanks

Need a right hand, white crank assembly to replace broken assembly. In pictures, distance from top hole to bottom hole is 5". (Hole dia. is 1/4".) Distance from top hole to offset bottom hole is 4 1/2". Arm length from casing to extension connection is 2 1/2". Offset extension arm is 2 5/8". Offset ... (cont.)

Hi Team, I live in south Flordia, house built in 1989. Majority of my windows has this type of crank. This one the handle broke. Can you assist in helping identifiy a replacment, and would you like any additional photos?

I need to know which crank to order. The windows were installed in 1989 and the crank seems to be stripped. No numbers or identifying marks.

Hi, I am looking to identify and purchase some replacement awning window openers. I have attached some photos. Approx center-to-center dimensions: Top holes: 0.45" Bottom holes: 1.3" Top-to-bottom holes: 5.2" Both arm lengths: 2.5" Arm pivot hole: 0.275" The only markings visible are "Pat no D-198 ... (cont.)