Viewing all customer Discussions for:

33-081 #10 x 1/2" Pan Head Phillips Screw

I cannot figure out what I need to get

Here are some pictures of the part I need. I can’t seem to find the correct dimensions of a replacement part on your web site. The measurements I have on this part is: 5&1/4” from the center top hole to the bottom hole - 2&5/8” on the internal short arm and 1&1/4 ... (cont.)

I need to replace these window cranks on a 4 awning window house was built on 1992.

Hello, I have old metal windows that are in desperate need of parts. I've checked the windows for names or markings but can't see anything at all. I am enclosing photos of them. Please let me know if you need any additional photos or information to help me place the order for the cranks and also fo ... (cont.)

Hi, I am working on restoring five 3-pane aluminum awning windows. The cranks are stamped with LEMCO and possibly date from the 50s or 60s. I am hoping to find replacements for the various rusted screws and I am missing one complete crank. There are 3 different styles of screws in the photos as we ... (cont.)

Lemco 95-2R Lemco 95-2L

Replace handles on jalousie windows

Can you ID this part? Top hole is offset to the left. Top to bottom hole spacing is about 5.25". Bottom hole offset is about 1.25" Arm length is about 2.00"

Sorry, not too techy.

Hi please help me identify my awning crank. It looks like 39-026 but I can't be certain. I attached photos including the interior. They're not the best. I can't figure out how to remove it from the awning mechanism.

Hello,I was looking on your website and found Product Code: 39-025 as a possible replacement awning crank for one on my windows. However, it only has 1-screw hole at the top. Mine has 2-screw holes - please see attached photo (1.png). I need this particular one because is has the screw connector ... (cont.)

Hello ? I have two crank windows that need some replacement parts. I'm looking for a new crank assembly and a crank handle. The windows won't close completely. I've cleaned all the mechanisms and such and they still won't close. Nothing is visibly warped. Attached are pictures that hopefully will he ... (cont.)

2 3/16" arm with a 3/16" thr'd hole to connect to window hardware

Just moved in. I lubricated what I could but a couple of the operators are shot. No markings at all. Gear teeth look worn and worn gear is loose and worn. Need white. Also need shoulder bushings.

There are no marking on the cranks. This Florida house was built in 1967. I believe the hole is 3/8 of an inch wide but there is only one hole at top and two at bottom. I believe that the arm length is 2 and 1/2 inches. The handle came right out of the crank casing hole and I cannot get it to sta ... (cont.)

Please advise price and availability for this crank Thank you Wayne

Good Morning,My name is Kenya. I need to replace a operator for my awning window but I am unsure as to which part to order. I'm asking for your assistance in identifying the model that I need.Measurements:Base (screw to screw) = 6"Depth (starting at base) = 2 1/4" approx.Width = 3/4"I have attache ... (cont.)

I'm trying to identify which operator I need to buy. The hole for the operator arm is threaded, but I don't know what type of threading it uses. I also don't have the name for the window manufacturer as they are all illegible now. The house was built in 1966, and the identifying markings are long si ... (cont.)

i need to replace the part pictured

Hello! I did a quick look on your site but couldn't find awning window operator that matches the specs of the ones I have and are wanting to replace. All the measurements are on the photo. I found a similar one online and edited with the two specs on mine that are different. Any help would be appre ... (cont.)