Viewing all customer Discussions for:

33-081 #10 x 1/2" Pan Head Phillips Screw

I have been unable to match this opener, attaching pictures. House was built in 1955 and has original windows. Thanks

My crank looks different than others I've seen on your site. Small attaching arm is 2 & 3/16". The actuating arm coming out of the worm gear has a "crook" offset where mine broke. Top to bottom screw mount is 5 & 1/4". Thank you

Right handed On base says RD. 1963 Pat# 190208 Says-92 inside box

Hello, thank you for your time. I'm seeking to replace the pictured windows crank and its left hand partner. Youre Lenahan Window crank, 39-075, is almost a perfect match, however the length of the arm that actuates the louvers is 2 11/16" while mine is 2 3/16" Do you have a model that replaces m ... (cont.)

Good morning, this is a crank for a triple window operator crank. I measured to the best of my ability, so I'm going to say this is close, but not perfect. I have 4 cranks not working...I have 9 of these windows. Top hole to bottom hole: 5 1/16 Top hole is a single hole Distance between bottom 2 ... (cont.)

Pat. No. 198202 U.S. 2 R.H.R.D. 1963 CAN I have tried multiple times to get these replacements, without success The single top hole to bottom R hole is 5 1/4 inches The bottom holes are 1 1/8 in apart The extension arm is 2 5/8 inches long and offset. The hole in extension arm is 3/8 in and fi ... (cont.)

Dural central oldpino # 218 Right hand

Hello, I received the item 39-011 to replaced my damage crank operator on my awning window, but I forgot to buy the screw that conects the crank to the awning mecanism. Which is the pad head or screw that I need for that? Thank you Andrea

Hi, I'm trying to confirm if my awning window crank operators are from Swisco or not, only marking/stamp I can find is Made in the USA SD (which you can see in first picture). I'm trying to get a replacement. If you need any different/better pictures, just let me know. They are at least 15 years old ... (cont.)

overall length 5-3/4" mounting holes 5-1/4" width 1-7/8" mounting holes 1-1/8" arm length 3-3/8" arm width 5/8" hole dia 3/8" made of steel

I've been trying to find a window crank so I can fully close my windows. Unfortunately, I don't see any part numbers, and the part I ordered from Amazon, is not the correct fit. Please help? Thanks!

I need to potentially replace 6 of these operators on an older house. a few still work to a degree, but not many and they are very stiff. So much so that it would appear some have been forced previously to the point that they push back out of their mounts on the window. Any help would be greatly ... (cont.)

Dear Swisco, I need to replace my Window Operator on my Florida Awning Windows in my Florida Room. The only Operator that is fairly close to mine is the 39-350My operator's arm though is off set and has a threaded piece at the end of the arm that slide into the hole in the shoulder and a nut to ... (cont.)

Don't know the maker and there are no markings on the cranks.

Hello, I will need parts for these awning windows. They were installed in 1967 in Massachusetts. The windows have absolutely no markings or any idication of the manufacturer. Thank you. Paul Wheaton

I need to order several awning type window cranks. This is the info from the operator and attached is a picture of the operator and a dimensional sketch. RH, RD 1963 CAN, PAT No D-198202

From what I can tell, the measurements you give for the 39-012 are essentially the same as my operator that died. My concern is the connection of the operator arm to the awning window movement system: In my case there was a screw assembly shown in pictures which had a female internal threads (and s ... (cont.)

Looking to replace an Awning Operator - Copied the parts I used prevuously from a different company

I just bought this house and it has several of these casement windows but the teeth are stripped on several of them so I would like to replace them.

Original to 1970 house I believe. Crank handle is loose inside unit and will not screw back in, just loose. Windows don't open.