Viewing all customer Discussions for:

38-096 Maxim Multi-Point Lock, Long Slider

Right Hand-Multi Point Sash Lock Assembly - White - Die Cast/Steel/Right

Hi there!I have multiple windows in which1. the lock handle comes off. In all cases the locking mechanism works fine when you insert the handle and turn it, but the handle routinely comes off2. the crank will open the window but not fully close it for locking. The window has to be pushed closed from ... (cont.)

What are the dimensions of this casement striker? Also which lock works with this striker? Related products that come up with the striker are Roto Multi-Point Lock, 29MM Fork Product Code: 38-138. However this lock also is available with a 37mm fork. How do I know which one I need? ... (cont.)

I need a replacement for a broken truth maxim multipoint sash lock with the fork design. It is a dark brown or bronze color.Thank youTed

I need the locks for left and right Milgard casement windows. I hope that the photos are enough to identify the correct ones. Other part numbers that I have ordered to fit the window (not the ones I need ) are as follows, which I hope will also help: HA0106OPWH, HA0105OPWH, HA0024HG, and HA0094MI ... (cont.)

I have a 2'x 4' Milgard Manufacturing window. My home was built around 2001. Viewing the window from inside the house, the window opens on the right hand side with hinges on the left. The crank no longer cranks the window closed, and the latch handle on the right side of the window has broken off. ... (cont.)

My window latch mechanism quit working and I am hoping it makes sense to just replace the part, if available. I took measurements as seen in the photo above, but can take any photo needed to help identify the specific part, thanks!

Looking for a replacement lock .

There is no part number or name on it On some other parts i see that is a truth window And I'm looking for 5 pieces

I'm looking for a part for my window it locks the window in place and the inside where you move the lock up and down to pull the window and tight is broken

I need a replacement for a window lock for hurricane impact window.

This seal latch is broken because my handicapped son pressed to hard on it before the window was totally closed.there are no names or numbers but the window is a Polaris about 20 yrs old.It seems that the latch is separate with 2 bolts from the rest of the sealing mechanism.

Looking for a replacement mechanism that open and closes a casement window. Window measures 31". Also I need to fix the locking mechanism. Thank youChuck

Hi I really need 3 parts for this window All the metal parts are heavily painted from previous owner So Left and right lock and "turn to open / close " door handle and hinge

Hello, I hope you can help me. I need to order replacement latch/locks for swing out windows(s) (milgard). However I am unsure of the replacement part number. Based on the two pictures I submitted are you able to tell me which part I should order? Thank you in advance for any advice or help you c ... (cont.)

Hi, I'd like to replace all the hardware in two Simonton windows that are 51"x28". Pics shown here and also the cranks. Thank you Jeff

I'm looking for a replacement for this hinged window lock. I do t see any markings or numbers on it. The actual hinge says 14D706 if that is helpful but that is not the part I need. I know this window is probably 20 years old I'm guessing. Thanks for your help. Sharla

Has number stamped on fork of lever- 2249 (Locking Lever) Has number stamped on inside of crank-2112 (Window Crank)

It is 3 3/4" From screw hole to screw hole. The latch is 4-1/2" long. The inside fork measures 1 1/8". Color beige. Pictures are attached. Would you please let me know if you have this part? Thank You Lori

The locking mechanism for my window has broken. I'm trying to find replacement parts for it. Thank you.