Viewing all customer Discussions for:

26-366 Vinyl Window Sash Pivot Bar

Please identify these items so I can order replacements.

I need to identify this part it's 3 in Long looks like I don't have the right measurements for you but see if you can match it up with some that you all sell like that a lot of times I can make things work

Hello,I’m trying to identify and replace a pivot bar for a vinyl double-hung window. I’ve attached photos of the part with measurements in centimeters. The overall length is about 7 cm, and the width is 1.4 cm. The screw openings are located at 3.5 cm and 7 cm from the pivot nose, as shown in the im ... (cont.)

The tip has broken off of this sash pivot pin and I need to replace it. Inscribed inside is: A-S NYC 6254 1

Here are photos of my pivot lock shoe. The dimensions are 1.625" tall, 1.25" wide and 0.5" thick. Do you have something similar that will work? I don't know what brand of windows. The windows have spiral window balances.

Hello, we could not find this spexific replacement on your website. The window it came out of is Duraguard 2424.

I am looking for channel balance and pivot bar for several MW windows. See attached. Thanks! John

I need around 16 pivots ,

Pivot pin broke.Also need balance for tilt window. Can you tell which pivot pin I would need.I see two that might work but not for sure which one is correct.

Hello, I need assistance ordering the correct window sash replacment balance.Attached are photos of the discontinued existing crossbow balance. -Single hung sash measures 33" wide × 30-1/4" high and weighs 18 pounds. The sash thickness is 1-1/4" -The current bottom shoe width is 1-1/4" -The screw w ... (cont.)

33" long 1 1/4" wide window weight 27.6# Which replacement do I need? Thank you.

I need a replacement

I believe they are series 795. I’m not sure exactly the size I would like to have some help please I need them replaced.

Hi - I purchased these parts from Swisco and tried to install them today with the video instruction for Crossbow to channel balancer. I was doing great until I had to put the sash back into the new balancers. I got the pivot bar (26-366) in the shoes but the shoes were locked so tight that when I mo ... (cont.)

Previously I ordered S795-28, 26-366, and 26-200 - and they worked great. I probably need the same items for similar windows in my house, but for a different length of a window. Please advise. Thanks, Steve

I need a pivot bar that works with the Series 795 balance. I've tried both the 26-021, and the 26-366. The 26-366 is closest but does not extend out enough to catch on both balances.

No markings that I found on the bar.

Do you have this balance it's a m&w double hung window the balance measure 31"

Looking for pivot rod for vinyl single hung tilt in window. Purchased at Home Depot about 20 years ago. Maybe solar industries? Not sure.

I have watched the video. It tells me that I need 24 inch series 795T lock 2 26-200 screw clips. my sash weighs 15 pounds my t-shoe one and a quarter inch My pivot bar is one and a quarter inch between the holes. I'm not sure whether it needs to 26-021 or 36-366