Viewing all customer Discussions for:

39-346 Jalousie Operator Replacement Kit

5 1/4. Dont know exact type 1950s

I have a jal-o-vent window in which the crank to open up the vents has stopped working (in fact I have 2, upstairs and downstairs bathrooms). The opening of the window is 15x15. Can use suggest a hardware that might work?

Can you locate & quote this jalousie operator?

None of the arms I've viewed match size or description but unit appears to be the same type?Chuck

Attached are pictures of my current Jalousie Operator and the Swisco 39-346. As you can see, my current operator arm points downward and the Swisco 39-346 points upward. We cannot reverse the Swisco as the crank would lay on the right side of the operator and is obstructed by the window frame. Sug ... (cont.)

The one pictured will not work because the "C" clip interferes with the bar that moves the glass. I need either the "C" clip to be on the other side of the arm or for the arm to have an offset. I am referring to the arm that has the teeth on the operator end.Thank youDanny

Hello,I recently purchased RH Superior Window Crank 39-012. It turns out to be unsuited to my needs.If possible I would like to return it in exchange for a proper crank for my application.I am attaching two images of the crank I need to replace. I?m hoping you can help me find the right one.I appr ... (cont.)

I am looking for a replacement for this window crank. It is for a solarium door with louvered windows. The screw holes are 3 7/8" and 4 3/4" apart. This from the middle of the hole to the middle of the hole. Do you have anything that would work for this?We are a city owned nature center and not-for ... (cont.)

I am looking for replacement operators for some old awning windows made by Woodco, which I do not think is in business anymore. Attached are 3 images that will show you what I am looking for. The first attachment is what I found online when I looked for "Woodco Face Mount Casement Operator - 9 ... (cont.)

I have a cabin with 8 Row windows with rank out bottoms Some of the crank hardware are stripped when trying to open and close. is there any replacement hardware? Thank you Mike

I need to find these parts for a hotel I am working on. Please see attached pictures and let me know if you can get these for me. I am remodeling a Hotel here in Saint Petersburg Florida. Attached please find pictures of the window parts I am looking for. Overall length is 5

Need four of these!

Chelsea hand crank windows on storm door

Looking for a replacement. Short arm 2 inch. Long arm 3.5 inch. No identifying numbers, markings, or letters on this crank

This is from a fifty it sixty year old window. It appears as though the internal mechanism is no longer worker. Please suggest the appropriate replacement parts. Thanks, Grace

New 2 cranks

Spacing between the 2 mounting screw holes is 4 3/4 inches. Only 2 screw holes on outside. But when you look at inside you can see that there could have been 2 more screw holes, but casting was never drilled through. Note rivet in body is above the crank and the arm swings down. All the other ones I ... (cont.)

I need to know what crank will work on this Stanley model 16 window

Looking for replacements

I NEED A REPLACEMENT OPERATOR FOR VISULITE JALOUSIE #505. RIGHT AND LEFT HANDED. PLEASE SEE ATTACHED PHOTOS AND SPECS. THANK YOU. JO ANN