Viewing all customer Discussions for:

15-195 1-1/4" T-Lock Balance Shoe, Closed Cam

Then top of this has broken and no longer holds the bar. I pulled it out of a window where I couldn't find the manufacturer. Sitting on its back, it's approximately 2" tall and 1 1/4" wide. On its side, it's approximately 1/2" thick.

the numbers printed on the window are g403 00192 7000, JW 05-08L0W-E, ALI IAASTM E774. the only number I could find printed on the balance is PAT:#5.737.877need 6 sets of balances and 2 window locks for this windowNot sure if you have just the springs or if I need to buy the whole balance set? ... (cont.)

hello, i cant seem to find a replacement for the window shoe shown in the ohotos. the overall sizes are close, but this one has provisions for the balancer to connect. can you recommend something. thanks robert

ALENCO WINDOWS (i believe vinyl) ABOUT 11 YEARS OLD....SINGLE HUNG

I need to find the plastic "T" window catch shown in the pictures. It is supposed to have a "J" book at the bottom that has broken off. This has occurred on over a dozen of our windows. The following numbers are on the back:6 679 0004 610 108D467 490The metal part numbers imprinted on the back ar ... (cont.)

Mine are 2 1/4" high your 195 days 1 7/8" mine are seven d double hung tilts

House was built in 2006. Hardware -- like channel balance -- has failed on these double hung windows. Installation that builder used is no long in business and I can't find any part numbers. I have a repair guy whose good at this kind of repair but I'm not sure what parts are applicable for these ... (cont.)

Looking for ply gem windows balance and height is 34. I think it is the 795 series channel. Please advice. Thanks

Need 20 channel balances. The metal is 26" long and has a "26F BSI TV" stamp at the clip end. Balance does not have any guide or other mechanism on the ends other than the spring clip attached to the string. The channel is 1/2" square, flat backed except at spring end it is scalloped in. Spring clip ... (cont.)

2008 Centex home with missing sash balances on one side if a heavy, double, front window. Window sticker included in one of the uploaded photos

I need a few sash balancer for MW window. That MW is stamped on the window lock. I have sent 4 photos so you could get a better feel for the detail.Label says MFR code MW-1Series: Twinseal double hungH-R15-46x77H-R25-46x65H-R25* 42x77I would love it if you could give me info on (3) of these. ... (cont.)

Regrettably I have no way to identify the manufacturer of my windows. They were installed by the builder of my condo about 17 years ago. I need about 8 sets, probably with the counterbalances/slides.

Patent number in the part is 6679000. Device is 2" long and 1/2 " deep

I need to order some of these for Ply-Gem 1110/1115 Tilt Single Hung windows 11 years old. Hopefully they are not plastic now.Thanks,Russell

Hi, Need four T-lock balance shoes for a Simonton window. I've attached pics showing the part. Any questions? Next step to order? Rick

hello.. this part was attatched to the window also a channel balance was connected to it

This is from an Atrium 200 series single hung window. There is also a patent # on the small end tab. Its is D467490.

balancer marking 26C need replacement end shoe

Need 2

As you can see from the photographs, my shoes have a channel all of the way down the front. Will your replacement shoes work and are mine open or closed cam? If so my channel is marked 26C, which SKU do I need to order?