Viewing all customer Discussions for:

39-533 11-3/8" Casement Operator Track, 3 Hole

Thank you for your assistance. Is it possible to replace this window hardware and possiblly the window insert? Please let me know if you can help. Thank you very very much!Rod

2 arms, the top one is 12 inches and other is 5 8nches Kind of hard to see but I put tape measure on arms

I need to replace CARADCO windows cranks. I see one on your website and wonder if it will fit. Does CARADCO has many sizes? Thanks!

Kolbe pre-2006.

Need to get new operator and handle

Casement window 25 1/2 by 50 1/2 dimensions inside trim . Need new operator because it is stripped out in the closed position. Brand name on current opener is Truth.

I need to replace the window cranks on several of the casement windows in my home. I hope the photos attached give you enough info. to know what I need to buy.

Hello, I am looking to replace a single arm casement window operator. The original was manufactured by Truth. I believe that it is about 7.5" - see the attached photos to determine exact length.Thank you in advance for your help.Stephen

I'm not familiar with windows. Is this apparatus the only thing that holds the window on the bottom? When remove it I assume I need the window closed and locked - correct?

Left and right I need the complete assembly

I have an older crestline installed window. The crank is no longer working - can't open or close the window. It has a pin that should go in to line up with the gears so the crank will do it's work but I cannot get that back in to its correct place. I am wondering if I should just try to get a new cr ... (cont.)

I have one bar (arm) Truth hinges with the number 40942-A stamped on the bottom hinge. I'm assuming these are no longer being made (they are on 25+ years old Marvin windows). Does the 2 arm- Right Hand (Standard) Casement Window Hinge Assembled 10" replace the old one arm 40942-A. Will I need a ... (cont.)

Which operator do I need? Casement window is 27" wide. Short arm 4 7/16" Left handed. Is it returnable if the repair man to fix broken glass has an operator in stock?

Made in USA; it says TRUTH on the top side of the arm

Hi, I have two roto operators that have failed. Both are marked EntryGard Truth. Both have smaller arm length of 4.5 inch and longer arm length of 9.5 inch:Right roto operator has 20810Left roto operator has 31538If you could let me know what parts to order, I would appreciate it. I also need a new ... (cont.)

Hi I'm looking for a replacement window operator for a Nordic brand has a number 40055 stamped on the bottom. Pictures uploaded.

I think your part number is Product Code: 39-031 EntryGard Dual Arm Operator but I am not sure so call me

Have 2 windows. 1 works ( took photos from that one ). Other windows doesn't open at all. Bought new crank but doesn't open. Would appreciate some help.

The broken crank has a 9" arm and a smaller arm. The long arm is stamped Entry Gard Truth. I am hoping to only have to take this apart once but if you need a number or code tell me where I can find it and I will do my best.

Do you have a replacement window crank, left side, Truth, 14" arm? For a wood frame window. (see photos)The original internal mechanism is all broken, warped, and bent the assembly all out of shape, it no longer works. Please LMK. Thank you! Best regards, Joe