Viewing all customer Discussions for:

39-533 11-3/8" Casement Operator Track, 3 Hole

I have an older crestline installed window. The crank is no longer working - can't open or close the window. It has a pin that should go in to line up with the gears so the crank will do it's work but I cannot get that back in to its correct place. I am wondering if I should just try to get a new cr ... (cont.)

I have one bar (arm) Truth hinges with the number 40942-A stamped on the bottom hinge. I'm assuming these are no longer being made (they are on 25+ years old Marvin windows). Does the 2 arm- Right Hand (Standard) Casement Window Hinge Assembled 10" replace the old one arm 40942-A. Will I need a ... (cont.)

Which operator do I need? Casement window is 27" wide. Short arm 4 7/16" Left handed. Is it returnable if the repair man to fix broken glass has an operator in stock?

Made in USA; it says TRUTH on the top side of the arm

Hi, I have two roto operators that have failed. Both are marked EntryGard Truth. Both have smaller arm length of 4.5 inch and longer arm length of 9.5 inch:Right roto operator has 20810Left roto operator has 31538If you could let me know what parts to order, I would appreciate it. I also need a new ... (cont.)

Hi I'm looking for a replacement window operator for a Nordic brand has a number 40055 stamped on the bottom. Pictures uploaded.

I think your part number is Product Code: 39-031 EntryGard Dual Arm Operator but I am not sure so call me

Have 2 windows. 1 works ( took photos from that one ). Other windows doesn't open at all. Bought new crank but doesn't open. Would appreciate some help.

The broken crank has a 9" arm and a smaller arm. The long arm is stamped Entry Gard Truth. I am hoping to only have to take this apart once but if you need a number or code tell me where I can find it and I will do my best.

Do you have a replacement window crank, left side, Truth, 14" arm? For a wood frame window. (see photos)The original internal mechanism is all broken, warped, and bent the assembly all out of shape, it no longer works. Please LMK. Thank you! Best regards, Joe

There is no number or identification on the crank

I can tell this is a Truth operator as it has their logo on the arm. However, there are no part numbers and all the replacement ones I've seen are slightly different. I'd hate to spent money and the unit not be correct.

The window opens fully but it won't close. I was under the impression that the Sprocketts ( not correct name ?) but the (Screws) were worn out and so the crank can't engage with the ( whatever it is called.

Hello, need to replace three window cranks, but I have eight windows and I will purchase five additional cranks. The name brand is Lincoln. Each hardware has two cranks and one maybe two brackets that extend to open the window. The top bracket has two numbers: 1. L30841 2. 20810 The second bracket ... (cont.)

Hello, we are looking for help with finding replacement cranks. We have two casement windows that need new cranks. They are part of a large triple window unit. The casements are on each side with a picture window in the center. So we are looking for a Right and a Left.

Hello Swisco! We have Pozzi casement windows and one of the operators isn’t cooperating. It’s a left hinge, right opening window and the operator cranks counter-clockwise to open the window. The long arm says EntryGard Truth. The window opens and closes until the arm reaches the arrow on ... (cont.)

This is a Woodco casement operator (see photos & diagram). The dimensions are as follows: Arm length: 11" Length: 4" Length at bottom: 3 3/4" Height: 2 3/4" Distance between top two screws: 3" It has a nylon roller. There are four screw holes. I need the operator with the arm that goes ... (cont.)

Hi I have about 20 windows in a 2000 build home I need to replace all the cranks on the casement windows and want assistance identifying the correct parts

I need to replace several 1980s-era casement window operators. Single-arm, 11inch arm from wheel center to gear center. Top-mount? No vendor/model markings that I've found. Thanks.

Hello, thanks in advance. Our window crank does not open the window anymore. There is a small gear that has come out of the unit and the gear teeth seem worn out. I assume the window handle needs to be replaced.