Viewing all customer Discussions for:

39-533 11-3/8" Casement Operator Track, 3 Hole

Hi I would like to know what operator to order to replace this one. It is a truth entry gard with a part # 30744. I can find the truth dual arm that seems to match but this one seems to have a third arm underneath the top ones. Can I replace it with the regular dual arm? The two arms are 9.5 an ... (cont.)

Window guide comes out of rail. Entry Gard Truth upper linkage 20810 lower link 6809

Good afternoon. I talked with Marvin window company to help ID parts and they gave me two parts that they no longer manufacture. I am looking for one Marvin Dual Arm Roto-Gear Operator (Ultimate wood casemaster disc LA Pre 2010) and one Sash Track (Ultimate wood casemaster disc LA Pre 2010). The win ... (cont.)

Will need L & R

Contractor for a glass company here, just can't quite locate this casement arm. Looks to be a Truth #30744B, old one got so rusted that the pivot point where it attaches to the sash rusted off, so just need that pivot arm w/ rail.

This a Truth part that we need to replace. The one to replace is the right hand window - picture of intact one is the left hand window. Please advise if replenishment is available.

Hello, I am looking for a single arm operator for a left hinged, operating casement window-I know the picture shows a right hinged--we cannot open the left to get a picture.

This part is on a 50-year-old Pella window. It will roll one way but will not let me roll it back.

Are you able to identify these operators?

I need a replacement operator for a Coradco casement window, hinged on the right side. There are two numbers on the arms, the top arm to the righ has 20755. The arm below it has 40577. I've attached four photos. The gear inside the mechanism is stripped. What part do I need?

I need this crank assembly. 4.5" arm. 6" arm. 8.5" arm.

Looking to replace 3 window cranks on windows. They are Polaris windows.

I am looking for a left and a right operator for casement windows. I am having a hard time locating these. The arm length is showing as 11" if measure from the mechanism and if measured from the elbow to the end it measures 9 1/2".

I need replacements for both right and left. Inside cover reads Biltbest Part 233 D.C.

The Cardco window crank extension arm is bent. The long arm is 12" to the angle. The short arm is 5".

I'm looking for this part of window

Looking for replacement hardware for two (left opening and right opening) Norco window crank openers. Not sure how old these windows are. The hardware is marked "Truth Entrygard". Not sure these match your part # 39-031 and 39-032 as the shorter arm, stamped 20755, measures 3 7/8" and said part actu ... (cont.)

before I start replacing the hinges with products from your company, I was hopeful you would guide me on how to adjust the crestline casement window. As you can see from the photo the bottom part of the window is not flush with the casement- I have included photos of the gap, hinges etc. I have a nu ... (cont.)

Crank threads are stripped, window opens but can't close by crank. Hoping to go through and replace all in house. Windows ordered by previous homeowners so don't know anything more.

Window crank match.