Viewing all customer Discussions for:

39-351 LH 9-5/8" Hinge Arm Assembly, Pella

Do you guys have this set? Its measures roughly 9 1/2 long and half inch thick.

Looking for left and right hardware

Casement

I'm not sure what kind it should be, I believe this item.

Do you Pella window casement hinge

Please confirm the Swisco replacement crank mechanism for a 1975 Pella wood casement window, 27" x 73". Also need the hinges and lock mechanism

Looking for bottom hinge. Showed part from other window. 2 screws to attach. If set is required, OK.

Need help finding this

Recently when I went to close this window it would not close all the way and the inside bottom corner seems to be missing a part. Attached Thank you for your assistance.Cheryl

Trying to identify which company this bottom operating arm off of a casement window has came from. I am guessing pella, but I am unsure

I need a left hand upper hinge assembly for a Pella Proline 3565 left casement window installed in 2004. I have added a photo with measurements.

Do you have these replacement parts its for a Pella window

hello. i have a question about pella product code 39-351. does the part come with the roller on the hinge for the bottom hinge? i could not really tell from the picture?

Not sure the manufacturer. But that bottom hinge on this particular model I have never seen !! Can u please help identify

the above armature (with meqasuring tape was fastened to the peice in the other photo to form a "tee" that kept window in algnment as it opened. looking from the inside the window hinges on the right (and opens on the left). I believe the winows are about 30 years old? Thanks for any info. ... (cont.)

I need the lower LH window hinge. the arm is 9.5 inches (2nd picture) between the attachment holes, the other hinge is approx.7 inches between the slide rollers and the attachment location (3rd picture). thanks

I'm looking for all the operating parts for a pella casement window. I need top and bottom pivot slides, the locking armature, top arm, plastic slides, all parts. I have two windows that have been screwed shut and all parts removed due to rust and age and the owner wants to rebuild them so they op ... (cont.)

pella 9040302 rh hindge

Hi there. after replacing the 39-175 pella hinge on my casement window, I noticed that the upper plate was bent and causing some misalignment. How do I get one of these along with the slide? Thank you.

Looking for replacement part that connects to window and slides on a framed track.