Viewing all customer Discussions for:

81-249 Glass Door Roller Assembly, Fits Pella

Ordered and just received the 81-244 rollers. Unfortunately, My door has the 81-098 roller. Do you know why the 81-244 rollers would not work? Seems like they would to me. Or, should I just return these and select the 81-249 or 81-098. Still trying to figure out why the 81-098 rollers are so expe ... (cont.)

Greetings Starting a new discussion as the post had an error and directed me to email instead. The Steel ball bearings are missing on one of my patio door rollers. I'd like to replace both rollers and the axles, but I am having trouble finding the right size. I need 2 rollers and axles. Th ... (cont.)

I have an older Pella sliding door - estimated 40-45 yrs old. I can not find any model numbers on door. I need door roller units. I have attached 3 pics that should help identify the rollers I need. Pls let me know if you carry these rollers and what the price is. thanks very much ... (cont.)

I am looking for a replacement roller. It is 1.5" in diameter, 3/8" wide and has a 3/8" center hole. I think the door is a Pella. What can you suggest? Thanks, Buzz

Hi, I have a Pella 72" x 80" sliding patio door that I bought from Home Depot Canada in 1996, I am looking for replacement rollers for the glass sliding door. Although I have the original receipt, it does not have a part number on it. Are you able to recommend rollers for this door? They are 1 1/2" ... (cont.)

Sent images 15,18, 21, 22 and PDF of dimensions No brand markings on door or mechanism. Vintage approx 1963 when house was built. Very heavy double glazed 7 foot tall by 39" wide all wood frame. Unless you have a perfect match to my dimensions,your 81-249 is as close as I could find. I p ... (cont.)

Need to replace roller assemblies for older Pella exterior sliding glass door. See attached photo. House was built late 70's early 80's and guessing this is original door. Can you tell me which part number I need to order?

When my home was built in 1978 or 79 a Pella sliding glass door was installed leading to the deck. The door is wooden construction but has no metal cladding. After careful inspection I have been unable to find a model or serial number on the door. One of the roller assemblies has failed making the d ... (cont.)

I am replacing a roller for Pella slider OX-26CX installed 1984. Please confirm that this is the correct roller. I prefer no to remove the door just to see if there is a flange. Thanks!

what is the difference between roller 81-249 and 81-244 Thank You Donald

I need to replace the roller assembly pictured in attached photos. Unfortunately there are no identifiers on either the assembly or door itself. I can tell you I think the door is appx 1992 vintage. The measurements are 2.75" long, 1.75" wide, and .75" thick. Wheel is 1.5" diameter. Can you giv ... (cont.)

Hi I need two of these for our older sliding door. I did not noitice any markings but I think the door might be a pella. I hope these pics. If you have them could you tell me how much they cost abd I will order. Thanks Ron

No markings on part.

I need to replace the rollers on my Pella 5

Glass is etch marked 3421989 Also 16cfr1201 c11 Anson z97.1-1984 1/8"

hi, I installed two of the 81-249 rollers today in my Pella sliding door (installed new in 1977). The old rollers came out easily and the new ones were installed without issues. On inspection, the new rollers did not appear to retract into the door as far as the old ones. The roller frame is in as ... (cont.)

I have an older Pella wood sliding glass patio door that needs the roller assemblies replaced. Please provide price and availability for the following roller assemblies that Pella customer service identified for me: Pella part 0C5Y0000 (galvanized) Pella part 0C8P0001 (stainless steel) ... (cont.)

Is the part 81-249 for a pellagra sliding patio door made in the year 1998

Question: I have a Pella Wood Sliding door purchased in 1995 I would like to replace the rollers. PART Number on Pella Receipt is: 1F/DFXO26 1F/DF012 Can you recommend a roller replacement part? also Do you have a video or instructions on how to replace? Thanks Joe

Require 2 new roller assemblies. What do you recommend I replace them with?