Viewing all customer Discussions for:

S385-15 15" Series 385 Channel Balance

I need replacement block and tackle for a milgard bathroom vertical slider. Window is ancient. Metal channel is 15"X5/8". Stamp reads 14 5 FT CMC 2. Lower window weighs 16lbs. See attached photos. Thanks

Our windows are M&M I believe. The metal portion is 15" long. The number on the back is 14 2 FW CMC 10.

Hi, I need two window balancers for a Milgard, single hung window. I'm guessing it is about 20 years old. The width is 1/2" and the length of the metal is 15". The following is stamped on the metal: 14 2 DO CALDWELL Thanks!

Hi. I have a window that has nothing to tell me what brand it is. It is aluminium. I need to replace 2 channel balances I have enclosed pictures of the one. Let me know if you have something I can order. Thanks, Kat

Hi can I please get help identifying this one? Stamped with 14 3 EQ CALDWELL Thanks

How and where can I get his part. The windows are 17" high Jimmy

I have a 15 inch channel balanceWhat model do I need ?Thank YouLeo

The metal portion of the channel balance is 15 inches long.Which one do I need?Pictures are attached.Thank YouLeo

The part number is 14-2 ED5 CMC 87. Both ends winged. 1.125" on the bottom tab. Do you have a replacement for this balance?

Hello, I need two of the 14 5 AS that ar 16" in total length. Where can I get them from?

i need a set for my pull up window this is the part i pulled off the window, can you tell me if you have this, thank you.

I need to replace my milgard balancer and get a replacement one. The text on the top says " 14 4 KP Caldwelll"

stamped part number: "1490 21" followed by "7M" in a font half the size of the previous numbers. To the right of the "7M" the stamp "168" or possibly "169" (also in a smaller font) is shown sideways with the number one on top.

I can't quit figure out which 385 sash balance to buy. I can figure it all out except the weight needed. Printed on the balance is 14-3 IG5 CMC 54.

About 2 yrs ago,I bought 2 Channel Balances (about 25" length) from your store. Works great! Now, I would like to order 2 pieces (left & right). Stamp # 1420; Metal Channel Length 15 inches; Channel Depth 5/8" (bottom nylon guide at Terminal Clip) and Channel Width 9/16". Top and Bottom Guides are ... (cont.)

Looking at you web site the parts dimensions of your channel balance S385-15 appears to be the closest to mine. All the measurements you show for the parts match mine. I am concerned that the fingers do not seem as long as mine. Info on current part: 14 3 HL Caldwell. The metal channel is 15". I ne ... (cont.)

Hi. I found the series number for my window balance wich is 385 and the length is 15 1/2 , none of the numbers match my stamp. my window is from Milgard the stamp # is 15 2. Can you tell me which of your stamp #, corresponds to mine. Thank you Miguel.

Question 1: My metal channel piece measures exactly 14-11/16. Do I buy 15" or is that too long and I should buy the 14" instead. Picture 1 Question 2: Does it matter what kind of hook is on the channel? I do not see anything that matches what I have. Picture 2 Question 3: Are the bottom wings o ... (cont.)

A wing broke off of one of the balancers and needs to be replaced. I'll replace the other as well.

The number stamped on the balance unit is 14 5 fu cmc 2I need 2 balances for my single hung bath window. Thank you Everet