Viewing all customer Discussions for:

S385-15 15" Series 385 Channel Balance

Hello,I want to make sure I order the right parts! These are pics of the 2 balances I need. I do know the longer one is 15" in length (just the metal) and 1/2" wide. The smaller one I didn't measure but at least the numbers are clear. I need a pair of each. Not sure my brand of windows but they ... (cont.)

metal is 15 inchesthanksEric

they say "14" on them, but when measured (metal end to end) it is really 15"--so not sure what to order...

Hello I need a part number identification on 14-3 BJ5 CMC milagard hanging window channel balance. Metal portion is 15" long. The rope snapped. Thank you.

Hello!Attached are the pictures! Thanks for helping me identify. The length is 15 inches.Thanks and talk soon!!Joel

#on channel 1420 BSI OH?channel 15" length? 9/16" wide x 5/8" depth?bottom shoe 1/2" wide x 1" depth? Thank you

14 5 BW CMC 1 need 2 of these, what is your part # for this?

what is the correct replacement part for this?it says 14 5 BW CMC 2I measured the metal length = 15" and width = 1/2"I want to buy 2thanksJon

I have Mercer vinyl windows with broken lifts I need replacement channels for 1 pair 24" window weight is aprox 19 lbs 1 pair 12" window weight is aprox 11 lbs 1 pair 15" not sure of the window weight just yet

Do you have these

Hello! When I took my window apart, it was missing the part in the pictures above on one of the sides. I need an identical part. Could you help identify which part number I need to purchase?

my sash weighs 26.5#. highest option is 17-20. old balance is stamped 26#. do you have a replacement?

I think its from a Jenweld replacement window maybe model 8100 SH single hung

I need 4 24 and 2 15 iinches window channel balances there are the numbers 2330 BS1 on the 24 inches channel balanced

Please help me identify

Looking to replace the attached channel balances (one pair). I've never replaced before but believe I can figure it out. Thank you for your handy videos.Regards,Halle

I need replacement block and tackle for a milgard bathroom vertical slider. Window is ancient. Metal channel is 15"X5/8". Stamp reads 14 5 FT CMC 2. Lower window weighs 16lbs. See attached photos. Thanks

Our windows are M&M I believe. The metal portion is 15" long. The number on the back is 14 2 FW CMC 10.

Hi, I need two window balancers for a Milgard, single hung window. I'm guessing it is about 20 years old. The width is 1/2" and the length of the metal is 15". The following is stamped on the metal: 14 2 DO CALDWELL Thanks!

Hi. I have a window that has nothing to tell me what brand it is. It is aluminium. I need to replace 2 channel balances I have enclosed pictures of the one. Let me know if you have something I can order. Thanks, Kat