Viewing all customer Discussions for:

S385-17 17" Series 385 Channel Balance

BSI block & tackle non tilt balances Markings 29 9 bsi. 16 4 bsi Looks like style. S385. Bottom shoe is 1-3/32" deep Need 20 of the 29 9 bsi And. 2 of the 16 4 bsi.

Hi. We have a single hung aluminum Jeld-Wen window that needs a new balance. The code on the side says 1620. The little plastic tab broke. Any idea which one we need? It's 17" long x 1/2". Thanks!

I Need left and right channel

We suspect that these original balances were too weak to work properly. All the houses in our development used the same identical window, except ours. We have double pane glass, but we suspect the contractor used the same balances as for the lighter windows. That's why I included the actual weig ... (cont.)

The photos are attached. The balance length is 17" (just the metal part without the end pieces)Thank youAl

I have several BSI window balances to replace. I did not take photos while any of them were installed (it is from another location out-of-state). The parts needed are: BSI 26-2 (two each) BSI 16-1 (four each) I have included photos of the part numbers, and photos from each end of the balance (th ... (cont.)

Would like to place an order of balances. Window Weight: 14.67 LB, height 22.5" x 33.5 width Balance: 21" length, Description: 19_4_KK_CALDWELL. Need 6 balances. Window Weight: 18.68 LB, height 28.5" x 33.5 width Balance: 27" length, description: 25_3_DL_CALDWELL. Need 22 balances. Window weight: ... (cont.)

We bought a house in October, 2022 with two double hung windows that have not operated correctly. Each window is missing a spring and the take out hangers appear to be damaged. We would like to replace all 4 springs and all take out hangers

Block and Tackle Window Balance for non-tilt window, marked 16-3 DN CALDWELL, has a broken cord. I assume I need to replace the whole Block and Tackle Balance, but I'm not sure which is the correct one. I couldn't find the other end of the broken cord, but the last picture, from your website, I thin ... (cont.)

Caen't determine bottom depth due to wear. It's either a 380 or 385 depending on depth. Any help is appriciated. Measured depth is ~ 0.900 inches. Eric

Hi there, I'm looking for the correct 17" channel balance for a non-tilt Mercer window. Do you carry this part pictured? I don't see it on your website. Thank you, Jaime

Springs are rusty and don't snap back. Metal is 17". Window weighs 6 lbs. Markings are faint but seem to be: DB HO1 16-1 Can you send link to purchase 2?

NUAIR window. 9/16 width 5/8 depth 17 inch with winged ends. 1640 stamp. Can you please give me the replacement model number? Thank You Scott

The channels are 17 inches long, not counting the ends parts and has a stamp on the back "16 5 Caldwell EM"

a year or two ago I purchased several S365-17 1630 balances They are wearing out and the the cord is breaking/ fraying on other windows. My question is whether a 1640 balance would last longer even if the original was a 1630 and/or the window was lighter than recommended for the 1640. ... (cont.)

Looking to replace broken window sash but can't identify the right number. 17 inches in length with the numbers on the attached photos.

I have 11 windows of several different sizes. The all are the same style. From looking at your website I think they are style 385. The metal channels are 1/2 inch. The shoe part is 1 3/32 inch deep. I am sending pictures to make sure I order the correct ones. The metal channels all are stamped ... (cont.)

I am trying to identify which balancer is correct for replacing this balancer.

I believe replacement part is S385-17 option 1650. Please confirm.Terry

To whom it may concern. I am attempting to replace all the window balance rods in my new to me home in Florida. I live 1400 miles away but took some measurements and brought one home with me. Please help me identify this so I can purchase new ones for every window.