Viewing all customer Discussions for:

S385-26 26" Series 385 Channel Balance

We have 9 windows and 18 balancers all matching. Please see the attached pics. If you need more pics let me know. I can have my employees obtain.

Please help me to identify the parts needed. Non-tilt window Window Weight: 30lb. Channel width: 1/2 inches Is 385 the right part? Thanks.

Sending photos to help locate correct window balances. Will send a couple more photos. Thank you

The cord has snapped in a couple of channel balances. They are stamped with 25 5 JS CALDWELL Do you carry replacements? Alternatively, can I purchase new cords for the existing channel balances? Thanks Ken

Hi I attached pictures of my channel balance. Can someone help identify the correct product I need, specially the stamp option. The length is 26" and width seems 1/2". The string on the back is broken and I need a new channel balance. `

I am looking for a 25 5 ES CALDWELL channel balance. Here are two pictures of the two end pieces. The metal channel is 1/16" short of 26".

Hi, The Channel Balance on my window does not have any guides, numbers or marks, just nothing at all. I made my measurements and found matching part at your web site. It is 26" Series 385 Channel Balance S385-26. The thing that I am not sure about is the stamp number. The reason I am replacing C ... (cont.)

I need a little help finding the right part the channel is 26 inches long I sent pics of the end guides .When I measured the channel it was half inch on one side and the side where you see the spring is 5/8 the closest I came to a part was S380-26 I found no numbers or markings on the old channels ... (cont.)

I need to replace a right side 27" Caldwell balance for my window. The balance is marked "25 4 FO"caldwell". The plastic pulley system in the balance is broken ( see phone). There appears to be an adjustment screw for the pulley system(see photo)

Hi, My windows are Kinro vinyl single hung. The channel balance looks identical to your 26" series 385. The markings on my channels are 26 4 and a very faint B.S.I and a small letter L. The window sash measures 28 5/8" high x 44 1/4" wide x 1" deep. What weight option will I need to order? thanks ... (cont.)

Hi. The stamp on the channel balance I need to replace says "25 4" which would seem to indicate your 2540, which is for a 19-25 lb window. I weighed the window, and it is 17.6 lbs. This window (and its twin) have been hard to open/close. Would it be better to replace with a 2530, which is indicat ... (cont.)

I need a window balance model 25 3 CO Caldwell with a 26" metal channel.

I want to find this part. I do not have much imformation but I know that the channel balance which is with this part is your 26" Series 385. Please help me to find this part I need to replace it.

The metal portion is 26 inches. It seems that one end of the cord is loose at the top and must be inserted into the window frame where the hole is, and then manually pulled down and secured at the top by the pullout clip? Then the window is replaced over the balances? Thank you. Bob ... (cont.)

On the Label: AAMA Certification Program MFR: PHP-28 Series:810S A-L-I@ VALIDATOR Type: Single Hung On the side of the Balance: 25 4 CW CMC 10 The metal part is a little more than 26" long. With the Plastic part, it is 27" long.

Milgard Windows - 25 5 IV CMC 0

Need a replacement for this part. It measures 1/2" in width, the metal length is 26". I included several pictures, just did not include one of the whole part in one picture because it wouldn't fit well in one picture. The numbers/letters read: 25 3 DU CMC 3 Thank you

The channel balance is marked, 25 3 HS CALDWELL, and the metal shaft measures 26" excluding the plastic end pieces. The second channel balance on the same window is marked with a different and less legible stamp, possibly 25 3 D1 CMC 4, as shown in the pictures that are attached.The window suppor ... (cont.)

25 3 BT Caldwell

Hi Tim and All, I have uploaded five pictures of the window balance channel. Based on the descriptions and pictures, I think it is S385-26. I will upload 4 more pictures Please confirm. Thank you, Tun