Viewing all customer Discussions for:

S385-26 26" Series 385 Channel Balance

Window balance has 25 4 IO CALDWELL. I'm thinking that part S385-26 with a sash weight of 2540 would work. Window is non-tilt and measures about 38" x 28". Does this sound right? Thanking you in advance, Bob Elliott .. Phone 503-646-1125 (if needed)

I'm pretty sure that my broken channel balance is Series 385 with the 15-004 shoe. But to identify the correct part, I don't know how to locate the stamp option to figure out the sash weight range, and not sure about the length. On the channel balance, I see a 26 5 IR Caldwell imprinted -- I assume ... (cont.)

I have a window without balances or clips and I need the parts when I removed the existing window with a balance the part number was 26 4 CW CMC 10 I figured the S385-26 2520 on your website appears correct but can u help me out? Your help is appreciated. Thank you Jason

I need replacement balances as one of the cables came off its pullies. The code printed on the housing is '25 5 IL CALDWELL'. They were manufactured in the early 1990's

I need to replace the Caldwell window balances on 5 windows. Two windows are '20 3 DK Caldwell', another two windows are '20 3 FK Caldwell' and I cannot read the numbers on the 3rd, but the channel measures 18" long (window is 20" H x 16" W) and has the same top and bottom as the 2 balances above. ... (cont.)

Will you please help me identify these Caldwell window balances? They are 26" long ( channel ) 5/8" wide and 9/16" deep. Any Assistance will help me to buy new balances. Thanks

I took pictures of both ends and on 2 identical ones. Metal is 26 inch long, it has stamped on it 25 4 FP CALDWELL metal is half inch wide.

I have a Caldwell 25 4 FP window balance and I am not sure what the proper weight replacement should be thank you

Trying to find balancer from my milgard double hung window. 9/16

25 3 LO CALDWELL

I'm replacing channel balances in a sash window. The channel balances being replaced are stamped "25 2 BU CMC 2". I could not cross reference this on your charts. I believe it's the series 385, 26 inch length of metal, not sure the weight. Please advise.

I'm looking for the 26" channel balance with the code # 25 4 HS Cadwell. BR, Tien

OLD BALANCES SHOW ONLY A MARKING OF 33 d.s. 41, which new balances should i order. thanks don

Please see attached pictures. Looking for Caldwell 25 4 gn replacement. The channel length is 26

Can't tell if this is 380 or 385

Hi Swisco Experts, I have a window balance stamped B.S.I. 2540K (see photo), and need to replace it (and its pair). It appears to have the dimensions of other "2540" units on the internet* 26in 5/8″ (16 mm) Depth 13 mm (?) width Also shown (separate photos) are close up of the guides. ... (cont.)

H, I ordered a pair of 26" SERIES 385 CHANNEL BALANCE. I still need 'top sash guide'. Which guide should I use? I am attaching the old guide I have on my window. Thanks

Can I just buy the string for 26' series 385 channel balance or I have to buy the whole channel balance? Thank you

When the printing on the back of the existing channel says 25 5, does it call for the weight option of 2510 or 2550?

I need to replace a window balance with markings of 25 4 GW CMC 7. The builder had listed Phillips Products as the maker. Please help to choose the correct replacement. Thanks Rama