Viewing all customer Discussions for:

S385-26 26" Series 385 Channel Balance

the stamp on my balance is 25 5 JV CMC 2. Which # does that relate to? Thanks

I'm looking to replace a few 26 inch long, half inch wide balances. Attached is a picture of both the shoe and the wing. I'm not sure which balance is the correct one to purchase.

Caldwell 25 5 KQ

Greetings, I need a couple sash balance assemblies and want to make sure I am ordering the correct parts. Stamped on metal channel is 05/07 UNIQUE 25-D-40. From your website I was able to gather...metal channel length is 26 and 1/16". Bottom shoe measures across at 1 and 3/32" so I think it is t ... (cont.)

I don't know what the numbers mean on the part I need to replace. the balance is 27" long and .5" wide Can you please review the picture below and advise? Thanks!

not sure window manufacturer. Removed balance is Caldwell 25 5 GR. 26 inches long

Opened window and then it wouldn?t close. Then I noticed that part of the white string was hanging out the top. Figured out how to take out the spring and got it out of the window channel. I probably need two of these, just in case and wiill keep the old one that works as a spare. The one that ... (cont.)

I?ve got a couple older milgard windows with channel balances that aren?t staying put in the window frame. I?m trying to replace 3 windows, so 6 balances total. Im not seeing anything identical to these on the site. Can you provide any pointers? Thank you!!

Need to order replacements, want to make sure I get the right ones. They are 1/2? x 25? and say, ?25 4 EQ CALDWELL? on them. Thanks, Dan

I have a broken channel balance from what I think is a Philips window that weighs 17.6 pounds. There is a marking on the channel that reads 25 4 Caldwell LM or LN. Length of the channel is 27.25 with the plastics end pieces included. the depth of the one plastic end piece is 5/16". Please let me kno ... (cont.)

I have a window with the subject window balance on each side. The cord on one side broke making it inoperable. Can you suggest a replacement part? Assuming I will need to replace both sides with a identical balance. Thanks

Window balance has 25 4 IO CALDWELL. I'm thinking that part S385-26 with a sash weight of 2540 would work. Window is non-tilt and measures about 38" x 28". Does this sound right? Thanking you in advance, Bob Elliott .. Phone 503-646-1125 (if needed)

I'm pretty sure that my broken channel balance is Series 385 with the 15-004 shoe. But to identify the correct part, I don't know how to locate the stamp option to figure out the sash weight range, and not sure about the length. On the channel balance, I see a 26 5 IR Caldwell imprinted -- I assume ... (cont.)

I have a window without balances or clips and I need the parts when I removed the existing window with a balance the part number was 26 4 CW CMC 10 I figured the S385-26 2520 on your website appears correct but can u help me out? Your help is appreciated. Thank you Jason

I need replacement balances as one of the cables came off its pullies. The code printed on the housing is '25 5 IL CALDWELL'. They were manufactured in the early 1990's

I need to replace the Caldwell window balances on 5 windows. Two windows are '20 3 DK Caldwell', another two windows are '20 3 FK Caldwell' and I cannot read the numbers on the 3rd, but the channel measures 18" long (window is 20" H x 16" W) and has the same top and bottom as the 2 balances above. ... (cont.)

Will you please help me identify these Caldwell window balances? They are 26" long ( channel ) 5/8" wide and 9/16" deep. Any Assistance will help me to buy new balances. Thanks

I took pictures of both ends and on 2 identical ones. Metal is 26 inch long, it has stamped on it 25 4 FP CALDWELL metal is half inch wide.

I have a Caldwell 25 4 FP window balance and I am not sure what the proper weight replacement should be thank you

Trying to find balancer from my milgard double hung window. 9/16