Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

Good morning, In need of a window channel balance. Attached are some pictures. Just need your help in getting the correct one/part number. Thanks Nika

When I tried closing the window last night, I heard a sound, like a twang. Now the window will not close all the way...shy about 6". Took the window out today and it appears one of the mechanisms in the Channel Balance is seized up, preventing the window from closing and I cannot get the channel rem ... (cont.)

I need help replacing my block and tackle window valances with the numbers 2630 BSI with an 18 pound sash

27 inch long, 9/16 wide. Marking: 26 4 HK Caldwell. Thanks for your help!

In need of a few 27" window balances.

Can you identify this part? The metal portion end to end is 27" The metal portion if I am measuring between the plastic clips is 26" My guess is this is a 380 or 385, but can really tell. The plastic wing pieces are just under 1" wide. Not sure what else you would need.

I can't seem to locate the shoe I have off a Milguard window I will attached a photo with measurment. The number on the balancer is 26 2 DW CMC 10. I do need two of all these components.I hope I have given you a good description of what I need.ThanksGary

26-5 then some unreadable letters printed in ink metal channel measures 27"

Aluminum single hung window. '2640' inscribed near the bottom.

Markings "26 5 HW CMC 7" Channel width seems to be 1/2" 1" winged plastic on one side 1 3/4" winged plastic piece on the other pics of all the things that seemed important

Hello,I need to replace the broken window Balance on one of my Alpine windows. It has the stamp "26-3 AH5 CMC 54" on it. The metal part is 27 inches long and both end plastic pieces have little wings on each side. I have already replaced these on a few of my other windows a while back but the pla ... (cont.)

I'm looking to replace channel balances on two non-tilt windows. I took many varied images, but with the 5-upload limit I tried to provide the most useful. The balances for the two windows appear to be nearly identical, the only differences are in the codes: 26-4 LM5 CMC 8 ? for the 21.5 lb sash 2 ... (cont.)

Can you verify what parts I will need for this balancer.

I'm looking for three different balances, #26-3 BA cmc 11, is 27" long( metal pc, not including the plastic ends) and 5/8" wide # 20-2 BA ca2 7 , is 21" long and 5/8" wide # 26-4 BA cmc 7, is 27" long and 5/8"" wide I'll need: 6 each of the 26-3, 4 each of the 26-4 and 4 each of the 20-2. My zip is ... (cont.)

Marking on existing balance is 26-3 ED5 CMC 87 Length of metal is 27 inches with a width of 9/16 Block and tackle with single spring

Need to replace channel balances in two windows. Want 4 channel balances 26 3 GW CMC 11 plus four 1 1/4 X 1/4 takeout clips.

Trying to order the correct channel balance. From the markings I know it is 2630 but not sure which series to order. Also... not sure if these need to be replaced to solve my issue or not... the window sash is incredibly hard to open and close... does not glide. The channel balances seem to be int ... (cont.)

Hello, The channel balance on my non-tilt window basically fell out when I opened my window. This is the first time I am replacing one of these and just want to make sure that I get the right part. The windows were originally installed in 2006. The only markings the balance has is 2630 BSI TH on t ... (cont.)

I need help identifying a balance so i can order 2 of them? The channel measures 27"

I need to replace a window balance. The chord broke, one of the bars inside is gone, and the clip has broken off. The length of the metal part is 27 inches. The metal part has the stamp 2640 BS and JL. Let me know if you need more pictures. Thanks!