Viewing all customer Discussions for:

S385-27 27" Series 385 Channel Balance

The right side spring assembly broke

The width of the channel 1/2 His height without attachments 27" No markings are found Please confirm s385 or s380 Don't know the weight

27 inch long, 9/16 wide On AAMA sticker: mfr code: AMSCO series: VLS

I'm a little confused. I measured the metal only and it was 27", however the stamp on the slider says 26 4 KW CMC. I don't see any other numbers. Please let me know any information you can so I can replace both sliders on my window.

Bottom 5/16" across Bottom 1 1/8 depth 27" long I do not what series?

Rope broke. Looking for replacement balances.

The metal part of channel balance is 27" long. Window sash weighs 24.8 lb. Please see the attached pictures. Based on this, I'm thinking the part is 27" SERIES 385 CHANNEL BALANCE Product Code: S385-27 with 2640 option. I'd appreciate your confirmation on this. Thanks.

Hi can you help me identify the correct balancers. 1st is 26-4 AA CMC 7 metal length is 27". 2nd is 29-4 KX CMC 11 metal length is 30". Winged channel balance shoe appears to be just larger then 1 1/8", and the metal slide appears to be 5/8" on the open ended side and 1/2" on the opposite side, and ... (cont.)

27" balancer stamped 26 4 JO Caldwell. 5/8" wide. With ends. This is a 25 year old Milguard single hung window.

I am having difficulty knowing which stamp option to choose depending on my window. Does it deal with my window weight or what the channel balance can hold?

26-3 AG5 CMC 54

Hi, The internal rope holding the spring in my channel balance broke. It came out of my single hung (non tilting) window. channel balance stamped with : 26 KR CALDWELL. It is about 28" long - end to end. Do you need anymore information than that? Thanks! -Josiah

Note pictures above. The metal part of the balance is 27 in. and the readable part identifier appears to be LT CMC - 2. The numbers before the LT are not readable. Can you identify and recommend a replacement part? Thank you.

Part # 26-4 GK5 CMC 4 27" long

Good Morning the cord broke in one of our window sashs I have submitted 3 photos, I am looking for replacement parts.

Hello, Good Evening! I am trying to find a replacement channel balancer / spring for my window. LEFT side bar shows 26 3 IR CALDWELL and right side bar shows 26 3 JR CALDWELL. Could you help me identify the parts please? If you have any questions, I can be reached at 703 376 8511. Thank you, S ... (cont.)

Unit measures 27" long.

These are Milgard windows with a stamp of Jan 1993 on the inside of each window. This channel fell out which is how I am able to measure it. Length is 27 inches, width 1/2 inch. There is no window clip but only screws so I am not sure how to take out the other channels. Any help in this area would a ... (cont.)

Hi, I have a damaged right window sash and wanted to order a window jam/top sash guide to keep the balancer in the window sash. The piece from other side has width of 3/4 inch, length is 1 1/2 inches, depth is 1/2 inches- the hole for the screw is 3/4 an inch from the top of this piece and is loca ... (cont.)

27" long window channel balance (28" including the plastic end caps). Markings: 26 4 CW CMC 10. Bottom end cap appears to be 1 1/8" wide. Bottom cap is 1 1/4" long.