Viewing all customer Discussions for:

S385-30 30" Series 385 Channel Balance

Can you please help to get the one which I need for replacing this, thanks

Please see the 3 photos attached that come from a Milgard Window. The markings (printed not etched) show 29 3 AQ CMC 4. Those markings are also shown in the photos. Measured length is 30 inches.

I need a replacement but can't determine the weight. Length is 30"

Hello need two balancers but I cannot find the right match on your website. Hope these pictures help in identifying the hardware I need.

Metal length = 30"Part # : 29 BSI NC, (see attached photo)Width = 9/16"

Please help me with the replacement of channel balance and top sash guide for Kinco double-hung window.The metal part of balance is 30"The 2 windows weigh 35 eachI would like a price to replace the balance and sashes

HI, LOOKING FOR 24 OF THESE SASH GUIDES. NEED 2 BALANCERS 2920, 1/2" WIDE.TAG ON TOP OF WINDOW SERIES 2114, DH-R30. DON,T KNOW IF THIS HELPS.WENT THRU THE PARTS PAGE AND NOTICED CHANGES SINCE LAST ON. IF MORE PICTURES OR MEASUREMENTS ARE NEEDED, LET ME KNOW. THANK YOU, GARY

I am in the need of 22 balances marked 3635 at 37" and 6 balances marked as 2950 at 30". I understand the 3635 and 2950 were originally made for ALCAN windows. What would you be able to provide to match these existing balance tubes. No I did not take the sash out an weigh each of them. Thank you ve ... (cont.)

I need 2 balances and a dozen hold down clips. I am attaching pictures. Thank you

Looking for the correct replacement part for my non-tilt window channel balance. 30" length. 1/2" width. Stamped with 29-9.

Hello, I need to replace this channel balance but not exactly sure which one to pick. I think the S380 or S385 look right. The balance measures at 30" long, and the broken off hook looks like the 380/385. Thank you!

Markings on ballast: 29 4 BSI RN(photo of markings included. Additional photos can be provided. I reached the maximum upload for your site.

Resersing tells me this.There are no metal stampings on the "plain" channel tube.Stamped on in blue is: AGU 29-5 GB5 CMC 25I measure the length of metal tube to be 29-3/4"I believe the "hook" "top" piece is nylon with dim between th foot and the hook 1-1/6"The other end is called "winged" also ... (cont.)

Looking for replacement Channel Balance for non-tilt window. It is 30 inches.These photos are the channel end with the hook.Thanks,Cliff

I'm having problems with the amount of tension needed to get the bottom pulley and come back to the slide loop with the string on a nuair model 29 5 Jv cmg 2 ThanksChad

my old balance has markings 29-5 AA CMC 11, end to end metal channel is 30". when choosing weight is it critical? i think it is a 2920 or a 2930?

Uploaded pictures of parts and numbers, I need 8 of them

Need replacement Channel Balance. Metal measures 30"×1/2", bottom shoe looks like 15-005 Markings 29 6 FX CMC 11

Attached are the pictures to help you identify my balance 2950. If you have any questions, please contact me. Thanks, Brenda

As requested, attached are the photos of the 2930 balance that we need to replace. If you have any questions, please contact me. Thanks. Brenda