Viewing all customer Discussions for:

S385-30 30" Series 385 Channel Balance

30" metal channel 1/2" back 5/8" sid, 24lb impact glass aluminum framed window, does not tilt. with winged ends.

Hi, I'm looking for 2 channel balances. The thickness seems to be 1/2 in., the length of just the metal rod without the plastic ends is 30 in. Pictures attached show more detail. Please help me to identify the part I need. Let me know if you need more info. Thank you, Ramsi

After some time finally was able to find the stamped numbers 29 4 also in vertical BS and horizontal A Length is 30" Nominal size 1/2", on the online catalog I was not able to find the number. The information is from one balance 9 of the windows are equal one is shorter in the withe. is shor ... (cont.)

30" length of metal.

Hello, recently decided to take on the broken windows in the house and the more I look the worse it gets lol. Window MFR. Kinco, LTD-JAX, FL. Series: Mark 40/50 STD H-LC30-53x78 H-LC30-48X95 Markings stamped on balance 29 4 of BSI Was able to locate the top sash guide and it worked great, but the ... (cont.)

Number 29 3 Bsi

Hi, I would appreciate a reference to your part number please BSI 29 4 is stamped on my balance. Metal measures 30" x 1/2" x 1/2" Plastic foot is 1-3/32" front to back. Thank you for helping me to get your part number. Allen

Can you provide assistance with determining what the correct part number will be for replacing the balance rod in the attached picture? The length of the rod is 30 inches.

Width is 5/8" (not sure if it is same as 3/4"). Length measures 30". Need help identifying this channel balance and the pricing information. The window panes are wide, will I be able to use 1/2" channel balances instead of 3/4" ones? Please refer to the pictures and suggest. Appreciate any advice yo ... (cont.)

Hi, I need to replace the window parts in the attached photos. What do I need please?

Metal length is 30 inches (does not include end pieces)

I need four of the channel balances mark 29-6 and I need eight of the channel balances marked 34-9. I also need eight of the small plastic pieces of the last picture enclosed

Hello, I'm looking to get 2 replacement balances. They are 30 inches long & are stamped 29 , 4 BSI, as seen in photo. Thanks

I need 4 count (to repair 2 windows, non-tilt) window block & tackle sash balance (metal part measures 30") & couple of take out clips. Based on the attached pictures, pl provide the part # to purchase.

I need top sash guides and channel window balancers (30 inches long) for my Nuair non-tilting double hung windows. Thank you.

Does Swisco Part S351-30 (2960) replace old items?

I'm looking for 6 channel balances They are Lawson windows, stamped 29DS 48L Can you help

I need two balances for my kitchen window. The window is single-hung, non-tilting, and the dimensions are approx. 50" w x 32" high. I have opened an on-line account so I can purchase the balances once I know what to order. Please advise

My broken non-tilt balancers are stamped 29 6 KW CMC 7. What series for Swisco do I choose?

As suggested by your help line, I am emailing the order information from a recent order and a photo of the channel balances they were meant to replace. The shoes are too thick to allow the window to close. Can you determine what should have been ordered?Did the markings on the picture tell you anyth ... (cont.)