Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

6236 pivot bar replacement

I have a broken part BFRich window I believe it's called the 'pivot bar" which installs at the bottom corner of the window - one end in a moveable plastic slot in the window frame and the other end across the bottom of the window. The horizontal portion of my broken piece is about 2" long. Can you ... (cont.)

This piece is broken that fits on bottom of my window that fits into channel balance shoe

I have a number of windows in my home in need of replacement sash balances. The home was a new build in 2004, and the windows are double hung, wooden sash, manufactured by Bonneville Windows that became defunct about a decade ago. Many of the windows now have broken cords, some are extremely diffi ... (cont.)

I purchased 2 of the window balances and one buckled to breaking when my handyman was stretching the cord down. The other on a different window installed fine and works very well now. He doesn't know when the little piece broke off. He assumes from the first image. Please advise. My worker wanted ... (cont.)

I purchased a home that has original MW Twinseal single hung windows throughout from 2000. Almost all of them have broken window balances. I have measured the silver tube (27" x 3/8" diameter)and the black foot (1 1/4"). After studying your website and comments, etc. I think I need the 850 series ... (cont.)

looking to identify this part

I have 34a, 34b and 34c. I also need the metal part.

hello I was told my windows were Capital, but i am not sure if that is true. i need shoes for both sides of window and the pins that go in the window. let me know if you need any more info Thanks Mike

Looking for a few replacement pivot bars. It looks like there might be a couple different 2.5" that might work, but figured I'd ask the experts instead of playing eenie meanie minie moe

I'm looking for a pivot bar replacement that matches this part and measure 2 3/4" Please help!

A metal part measuring 2.5" long, with the number "6236" machined on it. A metal tab protrudes from one end. This part was screwed onto the bottom of the lower window, a vertical, double-paned, double-hung window with the text "01-4 AWS WS-5" etched into the lower left corner of the lower window. ... (cont.)

The pictures show a sash pivot bar from a Milgard window that was installed in 2010.

Hello. I'm looking to replace the broken pivots in 2 of my windows I'm sending you a picture of them. The window maker is Crystal windows Also I need to replace on 2 windows, the window elevator 7R , I send you a picture tooPlease feel free to contact me anytime Agustín Thank you ... (cont.)

The customer said that the window brand is MGM.

Only identification on the window is NAMI NFRC 100/200 It looks like S795, I have a hook at the top like 15-198 balance clip. Shoe is closed 1 1/4" Length is 32" 32C marking on the balance pivot bar looks like 26-021 I need 2 of the channel balances with hook and shoe

Looking to find these replacement parts for Alenco (now Plygem?) windows installed in 2005. They are double pane windows that tilt out for cleaning. Windows still go up and down. Thank you!!

I am hoping you may assist me in finding replacement balances for the windows in my house. My home was built in 2000 and has the original windows. Several of the balances have failed and before I am forced to replace the windows (which would involve removing half of the siding on the house due to ... (cont.)

I'm looking for replacement pivot bars and coil spring for a house built in 1977. While there doesn't seem to be an exact replacement; I have narrowed it down to 26-021, 26-360, or the 26-444. The pivot bar is 2 1/2 by 5/16 by 3/16 inches. There are two screws but only one goes through the bar at ... (cont.)

Hello, my Mennonite friend is looking for the pictured pieces for Farley windows. We need 3 plastic and 8 metal.