Viewing all customer Discussions for:

26-021 Pivot Bar, 2-1/2"

Hi. In the photos, I believe I have a window balance. It helps keep the window open. The bottom end of it has a piece that's broken off. Is it something that can be replaced? I think the broken part reads PATO 4610108 - it's hard to read the etch. Also included a photo of the back of the broken ... (cont.)

This is the part that sticks out of the window that fits into the pivot lock shoes. it is longer than pictured this one has broken off

please help. your product 26366 looks similar however the "T" on the end that goes into the shoe does not look the same. do you have another one that might work? thanks

I do not see a pivot bar with these dimensions. Do you know how to get a replacement? Thanks, Gary

I have two sash closers that need to be replaced. Both right side and left side. I have attached a photo of my current device. It is 1/2 inch square in dimension. The cavity holding the device is 3/4" in width. Please contact me with the proper replacement part for this window. Thanks ... (cont.)

I had ordered 26-444 and 26-021 but these were not correct pieces. I was able to get help thru an email with one of your associates to get the piece of the bar that was stuck. This is the piece that I need to have. I believe it looks like part number 26-241. Can please let me know before I order mo ... (cont.)

Good Morning Everyone I am in need of a pivot shoe that is almost the same part(15-188)except that the width is 1" not 1 1/4. The parts are the same except for that dimension. Can you supply that part number. The pivot that is used is 22-226 and this is for the 900 series spiral balance.Good morni ... (cont.)

This is located at the bottom of the window sash, one side is fine the other side broke off, it?s the pivot bar.

The balance has marking 240 BSI. it is 24 inches long, 1/2 wide, 1/2 deep.The shoes in the photo are broken on top so I am not sure what that should look like. I need to order 6 balances and 6 shoes. Also 2 latches that are similar to photo.the shoe measurements are1 1/4 wide1 1/4 height1/2 deepPivo ... (cont.)

2.75" long, "L" end; from Eagle windows. I can't find something that looks quite like this.

Dear Swisco,I believe ours is a crossbow balance.I list the component for one of the windows.The windows are made by N.W. Patriot Manufacturing., Inc.These are measurements of the balance as well as picturesLower sash wt = 14 lbWidth of T-shaped shoe = 1 inFiberglass rod = 25 1/4 inCoiled sprin ... (cont.)

Need a pivot bar for a Republic Window. End is broken off but about 2 3/4" length. Threaded screw holes are 5/8" between them. First screw hole is 1/2" from tapered end.

pivot shoe 9/16 thick and 2 1/2 long and 1 in wide. Metal cam and the brake pad is blue. Can you help me identyfi this?

Is tutorial available on how to thread sash cord or does assembly come per-threaded?

Premium series window installed in 2004. plygem order # 114649-02. need side guide and pin that goes on bottom of sash and goes into side guide. Cord slips into grove on side guide. original window slip has PG3DHBG. Also, if you can identify can you give some installation guidance. I'm the home owne ... (cont.)

Looking for new pivot bar

The gray part that looks like a "T" of the window that allows the window to tilt open snapped off in the right side of the window . The first photo is a picture of the hole it comes out if and the second photo is where it goes into.

This bracket belongs to a set of casement windows that allows them to open inward. This specific part belongs to the right side. I was wondering what the name of this part is and if you guys own any replacements that i could purchase.

3inch 4 hole pivot

Cam Pivot 2 inches long Balance -looks like 38 inches long Shoe ...dimensions 1.5 inches long, .75 inch wide, .50 inch deepon the balance it measures 37.25 without the exposed pulley. Has markings 36 HD another balance of the same size has markings 36 TGThanks