Viewing all customer Discussions for:

26-079 RH Top Tilt Latch, 2-5/16"

The d/g units date from 1984 and the seals are still good. But the plastic fitments on both sides have degraded, split, broken over the years.They might have been intended as a feeble lock but there is a central aluminium catch to secure the upper & lower sashes. The units have been in since the hou ... (cont.)

I have vinyl tilt windows that were installed before I bought my house. Some of them don't work very well, and seem to require some parts replaced. I can't find any markings on them, except for 'INE 96' on the inside of the aluminium part that holds the glass. A websearch for that lead to a forum po ... (cont.)

Please help me identify this part correctly. thank you

Hello, Just wanting to know what exactly all that is different between those two parts. Thank you.

Looking for the part for windows

Please identify which part is better for the repair of my windows. The window middle lock is ok . The side plastic which has two screws are broken plastic.

I'd like to know if u have these. I don't want to drill additional holes in the window frame so I'd like them to match up perfectly. Thank u.

NEED TO REPLACE SEVERAL TOP TIP LATCHES ( LOOK LIKE 26-078 & 26-079 ) as 3 broke & expect more might ( windows installed 2002 ) during major wind storm 14 hours now , we had a window fall open. Even on a couple of the windows with good latch, we are getting cold air coming through on the right s ... (cont.)

Hi I am searching for replacement latches for the latch in the picture with the broken slide piece. It is the longer of the two latches. I purchased a new latch (also pictured) from a local window manufacturer but the screw holes are not aligned and the new latch dimensions are smaller. The distance ... (cont.)

we have Champion window, maybe 10 years old and need inside latch for tilt windows very much like your part 26-345 exceptours measures 1.375 inches by 3.375 inches Black

Hi, A couple of old window locks keep cracking when opening windows. I included pics and should show measurements. I've ordered parts from you guys in the past and you guys are far and beyond the best I've ever dealt with in terms of customer service. Thanks so much for your help once again. Happy ... (cont.)

Hi--I recently purchased a house and almost all the window tilt latches are broken due to the sun here in the southwest. The #26-410 is closest in measurement to my old latches. The only difference is the depth. My old latches are 1-1/2" deep and the #26-410 are only 13/16" deep. Do you think th ... (cont.)

Hole space 2.5 in Length 3 5/16 in Width 1 3/16 in

Help Cannot find this part on your site

we have quite a few of these that need replacing in our families apartment buildingI'm sorry that the Super did not include a picture of the latch removed.I thank you in advance for your help in this matterBest regards,Thomas

I ordered part no 26-078 and 26-079. They are just a little too thick like maybe 1/32 of inch and not oval in shape. This is for a window that is 21 years old, double hung. Do you also sell the self tapping screws if I can't find any the right size at Home Depot?

Need replacement tilt latch. Home was built in 1987.

Window latch for tilt window. No name window. 11196 R is the number on the latch part. Dimensions : 2 3/8 inches long by 1 1/4 inch wide. Screw holes are 2 7/16 inches apart. I need the right latch but will take both in bone or white.

measurements 3.5" length 2.25" from 1st screw center to 2nd screw center 1.25" wide 7/8" high 2 3/8" width

I am looking for these felt straps for windows we got from Tennessee Thermal.Our windows are 23 years old. Thanks Teresa