Viewing all customer Discussions for:

26-398 Round End Pivot Bar, 2-1/2"

I have identical windows in my house that are missing these parts in the picture as well as the pivot bars to go with the pivot lock shoe in the picture. If you could help find the correct parts that would be great so we can put an order together.

2-7/8" long, 11/16" between holes, small hole diameter Can't find anything on your website that matches this

Cant seem to find one. Thanks

Hello SWISCO Expert, My windows were installed 12 years ago and the coil springs have broken. Markings are PAT.#5.704.165 and 530. Hand written on the side is 7. The sash window weighs 5.5kg The width is 32mm, length is 70mm, and the depth is 13mm. I'm interested in buying 4 units to repair the wind ... (cont.)

Hello, I have these in a few windows in my home. Can you direct me to a replacement? One of the coils that I have appears to show a number 7 on it. Thank you.

I think the pivot bar is 26241 not sure which shoe cam it is. It's for appleby double hung tilt in windows from 2005.

A small bathroom window is in need of two coil balance replacements.

I need to replace additional bottom slide boots, coils, coil housings and pins on Associated Materials Alside tilt windows. The attached pictures are the replacement parts I need.Thank youMike

Can you help me with replacement parts? Coils are stamped with GG 9 and HG 9 and the cover has the number 18 on it. I also need the pivot pins and latches.

The rounded end pivot bar 2 7/8 doesn't fit into the S140-10 single coil quilt tilt. The original one that I am replacing has a flat head,

The window size is 28 wide by 29 high. The coil and pin broke. There is no marking on the coil to tell me what weight it is.

Do you carry these window balancers? I need several different strength springs. Your help is greatly appreciated.

I need to replace coil balance assembly, I will upload my photo, see you can help me

Hi, can you please help. This is the part that is broken on right side.

Bought the S140-26 but my current pivot bars don't fit. What is the matching pivot bars needed? Thanks

Hi, the only numbers I could find were these. H-R30-1218X2436 DESCRIPTION IS: CATALINA / DELMAR EXTREME/ SH THANKS STEPHEN

I'm looking for this part we have serious windows, windows that open up that you could clean on the inside. You do not have to stand in a ladder to clean them.

Trying to replace broken pivot balance shoe for a vinyl window. I ordered part 15-215 and all fits except the old broken cam has an internal slot that the pivot arm slides into and engages when I install the window and it locks into the cam. Is there a similar part that has a cam with a slot as the ... (cont.)

I need a window coil balance complete set right and left and two pivot bars see attached photos can you help me in picking up the right parts? thanks

My window was heavy to raise and wobbled, I looked under and saw this metal tab broken. What part do I need to order? looking from the inside its the left side. Thanks rick