Viewing all customer Discussions for:

26-119 Sash Release Lever

2" long x 15/16" wide Clamp dimensions Inside gap 3/16" Length of clamp 1/2" Thickness of clamp 1-/8" Clamp attached to main piece is 1/2" long

The pat# on the part reads 4.578.903

Do you carry anything like this?

Hi We are closer then ever. I ordered part 26-234. Sadly the two prongs, shown in the photo that measure 1/4" need to be 3/8" long. The piece I had was with two broken prongs so I did not know these were too short. Please advise. I would like to return 12 of the photo attached. I would like 12. ... (cont.)

The plastic locks on both sides of the windows at home are broken. I don't know where to buy accessories to repair them.

Hi can you please find these? The one that I had seen on your page is close

Your part 26-234 in the foreground has the proper clip width and thickness but the depth isn't sufficient. My clip (in the background) is similar the the Pittsburgh guy's. It has much longer prongs and two offset raised guides.

The window latch broke. I have included 4 pictures one of them has a ruler for scale.Do you have any replacement latches that would work?ThanksBarry

Need to replace pins, latches and latch slider parts. Please identify.

Part is 13/16"x2" and has a catch that releases the catch to drop window for cleaning. the tab is broken off on this sample

Hello, Hoping you can help me.....I need to replace several broken tilt latch buttons for my windows, pics attached. They are 2" long, 1/2" wide, prong is 1/8" thick, in between the prongs outside edge to edge is about 5/8". Similar to ones on your website but don't look exactly the same. Window is ... (cont.)

photo of broken tilt latch and working tilt latch

window tilt-out latch button for white vinyl window. It has two 1/8"-square vertical posts underneath that move the latch that's inside the window

The levers I just bought are a little too thick to slide in can you help me

I am looking for replacement window latch release tabs. These have become yellowed, brittle and broken at the little catches circled in blue. They are about 2 inches long and 13/16th wide. Those dimension are not critical, only the two feet that drop into the slider to release the tilt latch. Th ... (cont.)

Have broken sash latch releases for tilt in vinyl windows. Need 8 (eight ) as they are all broken and missing the catch prongs

I am looking for replacement parts for Jeld Wen windows. Customer service at Jeld Wen informed me that the part numbers were as follows: Sash Locks-31470 Left Hand Tilt Lock-32662 Right Hand Tilt Lock-32665. They directed me to your site for the parts but when I tried to search using the numbers I ... (cont.)

This part slides to allow window to get removed. Do you have replacement?

The first 3 pictures are for a 30 inch long trim piece that attaches into the top of interior window frame and acts as an insulator between the top of the window and the frame, it has felt material. I need two of these. JPEG 1 and 2 are pictures of a tab / lever that allows the window to tilt down ... (cont.)

I need the top slide tab that is missing in photo 2, and I need the top slide tab and 2nd piece under it that holds the window from tilting in (as seen in photo 3).