Viewing all customer Discussions for:

39-027E Ellipse Style Single Arm Operator, 9-1/2"

Hello, we are looking for help with finding replacement cranks. We have two casement windows that need new cranks. They are part of a large triple window unit. The casements are on each side with a picture window in the center. So we are looking for a Right and a Left.

I have a #45135 9.5 inch window crack that needs replacing It doesn't match up with 39-028E or 39-027E

Hi, I'm looking to replace the hardware on 6 bay windows, side hung, outward opening. They don't have any markings or brand names and are original to the house built in 1976. I can take additional pictures of the window locks but I would prefer not to remove the openers until I'm sure I can find a r ... (cont.)

The crank is 4 inches long and 2 inches wide.The arm is nine inches long.No identifying marks.Will need one for left and one for right window.ThanksFrank

My existing window casement crank made by Truth Company, was worn out and does not work. I need to replace this asap.let me know if you need more information or have questions. Thank you for your help.peter

The screws have been removed but I can't get this out. the projection from the operator on the room side is 1/2" it can't be more than that because it would project out past the window.

I need this part.

Trying to replace broken window crank. These are all the pictures I have at the moment.

Window is hinged right. I can seem to remove the crank handle to replace it. The mechanisk works.....

I need to replace several 1980s-era casement window operators. Single-arm, 11inch arm from wheel center to gear center. Top-mount? No vendor/model markings that I've found. Thanks.

Hello, thanks in advance. Our window crank does not open the window anymore. There is a small gear that has come out of the unit and the gear teeth seem worn out. I assume the window handle needs to be replaced.

This is off of a window in a house constructed in 1975.There are several of the mechanisms on windows in the house that are stripped or have broken housings.These are off of casement windows.Thanks

The word "Wright" is on the crank.

I have multiple cranks in my cabin that are stripped out and do not work. I have tried replacements from local hardware stores, but they don't work. Any suggestions?

Casement operator. The bronze color and the shape of the bottom is important. 9 1/2 inch arm. CAN we get this still? I see the white operator: Swisco 39-365, but can not find this bronze version. Thank you,

looking for replacement parts for casment window.. cranks and arms as shown in pics house built in the 70s base is 4 1/16" arm is approx 8" +1 1/2" with the bend need 8 total

Hardware has TRUTH marking and appears similar to the example photo on your site. I only took an approximate measurement without taking off some trim, but I can remove the trim and get a better measurement if needed. Thank you !!

14" arm. Left hand / 4 14" arm Right hand / 4 10 " arm Left hand / 3 10" Arm Right hand/ 6

I have an ancient casement. It needs all new parts. The operator arm length is 8". The sill bracket is 10" and the sash bracket is 11-1/4. Can you help? Thanks, David

Hi my current casement window crank stopped working. I don't have any other info except the picture.