Viewing all customer Discussions for:

39-028E Ellipse Style Single Arm Operator, 9-1/2"

Installed in 1996. There is a lot of play with window moving by itself with operator attached.

I'm traveling so I don't have any numbers. These are circa 70s windows. Various arm lengths. Pic is a bathroom window arm length approx 9in. LMK what else you need

NORCO casement window crank assy. for (JEL-N-555) ?

I am in need of 2 casement window operators one right hand one left hand. windows and operators are identical and mirror images of each other. both have one arm out of the operator and have a shorter arm connected to the window sash from the frame. Some identifying features include; etched into the ... (cont.)

I have a window in need of a new crank, about 25 yr. Old house. Number on the back of the arm is 40530 and number on the plate is 45047. Pivot point to middle of roller 9 3/8, plate is 4 3/4 by 1 1/4.Can you help me find this? Please and thank you.Njal

Trying to find replacement cranks for my older crestline casement windows . Windows to good to replace and have 3 of these crank assemblies (truth) that are worn out, can not find replacements. Any help pointing me in the right direction would be appreciated. Anything that would work even if I had t ... (cont.)

Malta window. Need crank and lock

Can you help me find the replacement part number?Thx, Dan M.

The windows are still good but the handle has stripped. I have a smaller casement by the same company that I might also want replaced. The part number is the same on the handle The second window is narrower and shorter but also a casement; I can send you pictures of that also if you have the par ... (cont.)

need to replace 3 each of left hand and right hand casement window operators..with ID # on them of IR-358

The only name I can see on it says, Truth. Is or was that a supplier? Can you confirm what I would need to replace this? I need a right and a left. the reach is 9.5 inchesThank you,Jeff

I am looking for a part to replace this part. It is a LH and says MALTA

Hi all, We purchased a house built in the 1970s that had top-of-the-line casement windows (for that time). Remarkably, they're in pretty decent shape, so we're trying to repair the cranks. This is the same crank from various angles. Any idea where I can find a some replacement cranks? Thanks! ... (cont.)

Need replacement of these two cranks. No ID on them. Pretty old windows. Thanks

Just bought an older home, and two windows appear to be ok...just can't open well..trying to locate parts to fix...thanks

There is a cylinder that had plastic coating on it and the plastic wore off. So now the arm falls out of the track. I don't know what exactly I need. Maybe there is a rubber that can be put on the cylinder. That would be the best solution but I don?t know if that is possible?

I have casement windows from the 1980's and need to replace some of the operators. Underneath the crank and cover it says Truth 45034-LH. The length of the arm seems to be about 9 1/2". Also, although the part says LH, it appears it should be RH. Can you help me with getting the correct replacement ... (cont.)

Looking for the replacement crank for this window. It says WRIGHT on the metal piece connecting to the window . Inside the window near the crank the arm widens quite a bit and has teeth built into it.

My old casement operator failed. It appears to have "Wright" stamped on the arm and part number 7701 stamped under the housing. The arm measures 9-1/2 inches from the center of the wheel to the center of the mounting plate/housing. Can you please advise on a replacement? Thanks! Pete ... (cont.)

I have Norco casements from 1986 with "Truth" brand cranks. When I open the windows the arm with the round plastic wheel drops out as soon as it reaches the slot where you can release it. Do you have replacements or fixes? I have pics but it wont load to this site.