Viewing all customer Discussions for:

39-028E Ellipse Style Single Arm Operator, 9-1/2"

There is a cylinder that had plastic coating on it and the plastic wore off. So now the arm falls out of the track. I don't know what exactly I need. Maybe there is a rubber that can be put on the cylinder. That would be the best solution but I don?t know if that is possible?

I have casement windows from the 1980's and need to replace some of the operators. Underneath the crank and cover it says Truth 45034-LH. The length of the arm seems to be about 9 1/2". Also, although the part says LH, it appears it should be RH. Can you help me with getting the correct replacement ... (cont.)

Looking for the replacement crank for this window. It says WRIGHT on the metal piece connecting to the window . Inside the window near the crank the arm widens quite a bit and has teeth built into it.

My old casement operator failed. It appears to have "Wright" stamped on the arm and part number 7701 stamped under the housing. The arm measures 9-1/2 inches from the center of the wheel to the center of the mounting plate/housing. Can you please advise on a replacement? Thanks! Pete ... (cont.)

I have Norco casements from 1986 with "Truth" brand cranks. When I open the windows the arm with the round plastic wheel drops out as soon as it reaches the slot where you can release it. Do you have replacements or fixes? I have pics but it wont load to this site.

I am also looking for a replacement for the Anderson 7073. I need a couple of LH and RH setups. The existing window crank arms are only 7 1/2 inches long while yours are quite a bit longer. Any thoughts on if these will still work? Does anyone else have feedback on how these worked for their repl ... (cont.)

These are vinyl clad 4500 casement windows installed by NVR homes around 2002, I would like to obtain some replacement crank mechanisms as the gears have stripped. ID info is on one of the pics, can you assist?

Can you please help me identify who make this crank, it is from the mid-70's? We have a lot of windows that are not working and need to find replacement hardware.

Hello guys, Would you happen to carry this one? It doesn't look like Anderson. It's from 1970Thank you Roman

I have a Truth window crank RH 45136 9 1/2 inch arm crank. Slips when cranked Need another RH model and a LH model. (two) Please advise of availability and price. Harold

I'm looking for 45034 truth hardware operator to open up my window with a straight arm. I ordered one on the internet and the arm was almost 12 inches. In the photo I attached the one I need is the smaller one which the straight arm is only 8 inches. Do you still this product.

40055 T LH 4

It was great that you could provide the Ellipse single arm operator parts 39-028E and 39-0227E I ordered one of each to try and they are good for my windows. However the round when at end of arm does not fit into existing track, too thick. I looked for track and thought I found it, item# 39-512. ... (cont.)

Hello, we have older craftline casement windows. On several of the windows, the plastic

Hi, I need window operators (L & R) to replace 2 Reuten operators on an older window. I have attached two pictures, an overall and a detail of the crank mechanism. The length from the arm's hub (?) to the center of the wheel (bushing?) that slides in the track is right at 11 inches. Do you have som ... (cont.)

Need Truth LH 45135, arm length 9 1/2 "

the only marking is the name Malta on the crank handle

40530 on bottom of arm. Worm gear striped, doesn

Good morning, Looking for replacement casement operators for our ROW Windows. Entrygard Truth Operators and Wright were the original, but discontinued and then the Ellipse Single Arm Operators were the replacement. Will these Swisco operators work like the Ellipse? Is so can I order ... (cont.)

IS IT POSSIBLE TO TELL ME WHAT REPLACEMENT OPERATOR I WOULD NEED? ON THE BACK IS THE # 7 IN THE MIDDLE ON THE BACK IS THE #34 AND ON THE RIGHT IS STAMPED LH. THE U.S. PAT.4505601 IS STAMPED ON THE BACK AS WELL. THE ARM IS LABELED TRUTH. THE ARE IS 9 1/2" FROM THE CENTER OF THE GEAR TO THE CENT ... (cont.)