Viewing all customer Discussions for:

89-030 Multi-Point Striker

Hello! I have a slider Series 5200 Narrow Stile AAMA SGD-R20-96x96 I need a replacement handle and locks, rollers and the slider track. Can you send me the links to the replacements? I think I know what I need for the lock and handle, but not sure on the track and rollers.

Sliding door handle, says made in new Zealand. Does not have any numbers or other markings other than the squiggles on front. Screw holes where it attaches to door are 4 15/16 inches center to center.

My living room has a 4-panel set of Certainteed sliding doors (Newcastle XT). The two middle panels move, and the two side panels are stationary. The two sliding panels lock in two ways: 1) mortise locks: These locks are doing fine. The left-hand sliding panel is equipped with three mortise locks, t ... (cont.)

Hi,I just moved into a house and the patio door does not lock because it's missing a strike plate.Based on the logo, it's a Milgard patio lock. The door frame has 2 openings that are too large to engage the lock hooks.Would appreciate your help to identify the necessary part.Thanks,Cary ... (cont.)

I'm looking for the correct model latch for my sliding glass door. It's been I've 10 years but I think it might be Metal Industries mfg door.ThanksChuck.

Here are photos I was unable to attach to my previous message.Louise

I have a 2013 Thermotwin Glass Sliding door and the handle has broken as shown in the following pictures. Do you have a replacement handle or something that would take its place?Thank You,David

I ordered the 82-238 to replace my broken mortise lock along with what I think is an 82-080 handle but they don't seem to fit together. What I think was the 82-080 came with a striker and a different double hook lock. Should I re-order the 82-080 that doesn't have the double hook lock? ... (cont.)

Only the sliding glass door handle is broken apparently because of a broken screw and the lock works well. There is about 5 inches between the two interior screws with the handle mechanism falling half way between on the interior of the door. It has a nickel finish

I believe the part number is 82?081

Hello, i am interested in replacing my sliding door lock with one that has an outside Key Cylinder to be locked from the outside. I found on your website Keyed Mortise Style Handle Set, 4-15/16" Product Code: 82-081. but wanted to make sure it fits first. I added some photos here. i think its Milga ... (cont.)

Hello all, Checking to see if you could help with identifying what the received part would be for this lock many thanks

I removed my Ply Gem receiver to install a doggie door. Now I've lost the receiver. It is about 6.5 inches and receives the hooks from the 9 inch latch mechanism. Do you carry this part, or if not can you recommend a source? Thank you

Ordered one nope wrong one. Has to be a flat plate of sort.

I do not have anything other than these pictures. The previous owners were using a piece of wood to lock the door in the track. I contacted Harvey building products and they sent me this silver metal striker? that they advised was the correct part. It doesn't fit unfortunately and was hoping you can ... (cont.)

I have a Value Slider (manufactured in Duarte CA). The receiver part is missing so I cannot lock the door. The factory seems to be very slow in responding and it is creating a safety issue. Can you help?

Need replacement

Hi looking for the keeper plate for my Certainteed Sliding door. It has a double hook latch . Looks like a 4" opening need where the latch hooks grab. Thanks Brian

It seems like this may fix part of the problem if it will fit. Lock will not function with the lever on the inside nor the key. We have two doors exactly alike. On the one the button in the center of the mortise piece is broken off. Not sure what parts of the handle I need. Thank you ... (cont.)

Need to replace patio door handle and lock. TRI-K-36 S0092- 40842BA Not sure I nee the complete set or parts. I will call Toni Fowler