Viewing all customer Discussions for:

90-278 Lock & Keeper, 2-1/16"

Cannot ID brand of windows. Purchased house July 2021 parts are missing and/or falling apart. 10 windows various size. 1. 2 windows are missing 1 vent latch ea. 2. 1 window missing the part to turn and lock window. 3. All windows need weather stripping replaced. Some missing most are ripped and fall ... (cont.)

holes are 2 1/8" on center. Part is 2 3/4" x 1 1/8".

Do u carry earthwise vinyl windows Parts, I need some of the Upper parts for window lock as in picture. I will be appreciated. Thank u

I'm looking for four sash locks for my vinyl Viking windows. The sash lock is 2 ¾" by about 1 ¼". I have attached a photo. Please note that the "receiver" is very thin. (I purchased a replacement part on Amazon, but the "receiver" was too thick, which prevented the window from opening. ... (cont.)

Do you have a good match for this lock and keeper for a wood frame double hung window? I'll need 15 of them Thanks

90-278 appear to be the sash lock and keeper I need?same measurements, with the exception of the lugs. My closest match? If it makes a difference, from Silverline V1 2200 Series Windows. Thank you for your assistance.

I bought CertainTeed latch already, they worked fine. Now I am looking for White vinyl windows sash lock (see picture attached) Please help me. If they're in your stock, tell me how much each and how long would it be shipped to me. Thank you

Can you help me identify parts for the sash lock and keeper? The keeper screw hole distance is 2-1/4" (measured from the actual hole on window), and is 1/4" depth. I think this is the right one (https://www.swisco.com/keeper/pd/Hung_Sliding-Replacement-Sweep-Locks_Keepers/90-183), but can you verif ... (cont.)

Hi Require Qty 4 of each Thanks

Stamped on the outside of lock reads 'Philips'. On the bottom side stamped inside reads R 92 03-6 Bottom right side reads A-S PA Stamped on the backside of the latch reads 9659.

I need this part. Where might I find it. Thank you.

Please post this to the appropriate area. I just replaced these Tilt Latches with Item #26-393B. They are a perfect match. Also, your video demonstrating removal is excellent except for one thing. My latches are over 18yo and plastic sitting behind glass gets very brittle. I recommend using a 1 inch ... (cont.)

Needing parts for fold out Champion window. Photos enclosed. Need two each.

Latch for sliding window

Looking for missing window sweep

Dear Swisco associate,I need to replace a broken lock on one of our windows. Numbers stamped on the latch are 9203 R04, and on the catch, 2306 93 (see attached pics for more details. Do you have any suitable replacements on hand? Thanks in advance for your help!Best,Garrett

I was thrilled to see this opportunity to hopefully get help with my issue. I have five vinyl windows installed about 1904; I moved in last year. I have a problem locking the windows, as do, apparently, many other people in the building. The plate on the frame of the top window is a bit too far fr ... (cont.)

Hello! I have one window in my home that doesn't have a full latch installed (and maybe never did). Based on the photos/measurements of a complete window latch (another window in my home, also Jeld-Wen), I was hoping you could point me to the correct kind of lock? I was thinking this looked close: ... (cont.)

the current Viking lock on my window is not working. I don't see anything but the name "Viking' on the lock.

I have a customer trying to replace broken locks on her windows. She says there are no identifying labels on the windows probably built in 2014. The distance between the holes 2 1/16". She has tried several with this distance between the holes, but is running into issues with the set back not being ... (cont.)