Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

I'm looking for a white bubble seal. It has a base width of 1/4" and a bubble height of about 1/4".

I ordered and received bubble seal 58-135 but it is to small for the track, mine measures 1/4" wide in the slot. I do not seem to find the correct size on your web sit. Do you have one in white that is 1/4" for the slot, the bubble part is about 3/16 or 1/4 also.

The pictures are of a T-Slot weather strip that is located on the outside bottom of an MW lower window sash. The windows were installed 2000-2006. Any input on where I could find this or what could be substituted for it ? Thanks, Jeff Weber

Hi, I need the strip that attaches to the bottom of the lower sash. Any chance you have them? TY

Neighbor bought through Lowe's three years ago. I am not sure which one she purchased as the numbers on her sheet do not correspond to any in your website. She kept original paperwork so I have attached for your review. I will need enough for 9 windows - the same house layout as my neighbor. Than ... (cont.)

Looking to replace bottom window seals on 17 year old windows. Black-colored, T-slot style. They are dry and brittle. Slot dims are roughly 1/4". Also looking for some advice on how to "uncrimp" the ends of the slot so I can replace the seal. Thank you.

Sealing rubber

I need weather strip for a nu-air egress window. it is a bulb type with a nylon or plastic strip. it was either self adhesive or glued on. it has a 1/4" or smaller stick on strip and the bulb is approximately 5/16" I need 4 five foot pieces. it is the outer strip you can see where I cut the piece f ... (cont.)

Hi, I am trying to find window seal for my 2005 Milgard Windows. I can't seem to find the right seal. Can you please let me now if you have something similar to this. Thank you.

I have A job in Tampa to replace weatherstripping on approx 30 Single hung windows From 36-50" wide Could you please look at photos and determine if you have or can get or recommend where I can purchase please. Thanks Martin Ct ventures.

I've got an early 1960's model Rembrandt mobile home that I am renovating. All of the weatherstripping has hardened and some is missing, so I'm hoping to replace it. I have identified what looks to be THREE different types of weather strips for each window. 1. Bubble seal at the bottom of each wi ... (cont.)

Would you be able to identify this weather seal or an appropriate replacement? The opening of the channel on the bottom of the sash is 1/8". General info: This is a non-tilt, single hung window with no brand markings. I cannot find a way to remove the lower sash. There are no clips in the side ... (cont.)

Can you please quote me a price on the the weather strip attached for a window ? Thank you Nicos

I meed to replace some very old weatherstripping that's on the bottom of my sash. These are single hung windows.

I need to replace the bubble seal(?) at the bottom of my Traco TR911 windows.Can you tell me which seal I need? Mine is crumbling so I couldn't get a very good picture. Hope the model # helps. Windows installed in 1998.

This seal runs the full length of the width of the window. This item is approximately 0.41" / 10.42mm wide. It is approximately 0.08" / 2.06mm tall - or - thick not including the "tree" extension that fits into an aluminum extrusion. This piece is not or has no magnets.Any chance you can help me lo ... (cont.)

Do you carry this weather stripping it runs Horizontal on my sliding widows? See pictures

Just replaced some spiral tilt window balances I received from Swisco today (THANK YOU!), and now I'll do a whole bunch more!IWhile doing this, I realize the weatherstripping on the bottom of the windows is cracking, mushed to one side, brittle....and a lot of it already broken off. It slides right ... (cont.)

I need to replace my weather stripping. See photo. The size is 3/16 bottom, 1/2 bulb, white. Please advise. Thanks

Hi there. I'm looking for a replacement weather seal for an Atrium sash window manufactured in 2005. The t-section is about 3/16" wide and 1/8" tall. The round part is 3/8" in diameter.