Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

I previously ordered a commercial bubble weather strip from your company that was to small, the size I ordered was 9/32." I need one that will fit the dimensions in the pic. Strip width = 1/4" and tube approximately 3/8" wide in diameter. I included pics for reference. Any suggestions?Best Regards,G ... (cont.)

Hi guys,My windows are not keeping the cold air out. Do you have any replacement parts for vinyl Windows like the attached. The sides are two circular tubs, one tube gets inserted in the channel. The other is supposed to seal the gap between the window frame and the window but it's not working well. ... (cont.)

Am looking for replacement of weatherseal for CertainTeed casement windows The T-Slot is 3/16 but am not sure what the shape of the foam insulation was as the photo's show.

one photo of screen needing replacement; do you sell screens. two photos of bottom of window of apparent plastic weather strip held in place by screws--do you sell these?

I'm going to assume that I need Part# 55-174. Of the three windows two are fixed in place with no way to remove the old brittle glazing without digging it out in pieces. Am I correct? If so do I just press the new glazing in the gap?

Hello, I have older aluminum windows in good shape, but the bottom sash weatherstrip seals are a bit hard and are too narrow. Do you have the replacement part to fit these windows for a tighter seal? Does this come in a roll? I have 9 30-inch-wide windows, 2 seals for each bottom sash. Thanks. ... (cont.)

Hi, My Simonton double sash windows are in need of new weather stripping. Please review provided pictures and recommend weather strip replacement. Thank you.

Looking for this part,

1/4 inch is the - part of it and the round part is 1/2 inch and I need at less 8 feet

Please identify the replacement weather strip needed for my 1996 certainteed vinyl casement windows. This is in a T shaped groove toward the exterior of the window.

This seal is approximately 5/16 and the T is 3/16, do you have anything or point me in the right direction

There is no number on the vinyl strip there is MDL 1010 on a label on one of the Alliance double hung windows. I hope that this email is bundled with the original email.

Can you please helpme out? If you stock this type of seal I need to purchase some.

This are the broken pieces, the only brand that I can see is GA on the locks.

I have 17R60314U2 single hung Windows and need to replace the weather-stripping on the bottom of the sash. It is cut to the width of the window ... I need 30'

Good Afternoon: Can you please let me know if you handle patio door track like what is shown in the attached pictures? The numbers off the door are: CTG Tempered - 106JR9081 - UV-(1) - 408(IJ)0098 Thanks for your help. Have a good day. Thank you. Mike

I need to replace my bubble weatherstrip. T slot size 10 mm and bulb diameter looks like same

This is a t shaped bulb weather strip. The T flange is 1/4" wide. The bulb is aprox 5/16" tall and overall height is 3/8" I need one piece. If you dont have this size is there a replacement style that we can use.

Hello, I am looking for weather stripping for my door. I've provided pictures of the side view of the weather stripping, and several pictures of the weather stripping as it looks installed, but pulled out for you to see, as well as the small grove in which it gets inserted.Do you have anything that ... (cont.)

Looking for replacement weatherstripping for my 20 yr old Certainteed casement windows. Looks like 58-200 might work, or possibly the 58-135? The seal is about 7/16" wide, the sash insert width is about 3/16" and the insert depth looks to be about 1/8". Thanks