Viewing all customer Discussions for:

58-135 25ft Bubble Seal, 3/16" x 11/32"

Hi, I need to order some seals for some basically new Simonton casement windows. I checked with Simonton but they won't sell them to anyone who is not a dealer. They keep referring me to make a warranty claim, which I did but no one has gotten back to me. I'm hoping you stock some seals that will wo ... (cont.)

Cmc windows casement outher weather strip seal CMC FULL CLEAR 802939 LLI01/ 34' MFR.02/25/90 44 1.2 =9

Hello, I have the following foam filled bubble seal in the pictures and dimensions provided. Please help to find an equivalent replacement for this. Regards, Handyman from Illinois

No markings on the weatherstip. It's about 1/2" around and the top slide part is 3/16". Do you have something like this?

Can you identify the correct seal?

need to identify weather seal that goes to the bottom of aluminum frame windows in my house in Florida. The current weather seal has gotten very hard and brittle from the Florida heat and needs to be replaced. It fits up in a slot at the bottom of the windows are Nuair brand.

We have 12 casement windows which are 11 years old made by Certainteed. The company is no longer in business. They measure 22.5 inches by 58 inches along the outer edge. We are fairly handy, but we are not seeing an obvious way to replace the weather stripping. So, our questions are: 1) ... (cont.)

Trying to identify a window seal replacement. Also 1 of the windows has a broken lock. The mechanical linkage has the name "Entry Guard TRUTH" and number "31272".The seal dimensions are 3/8" diameter and 1/4" wide at the base.Not sure who the original manufacturer is. The house was built in the l ... (cont.)

Hello I'm replacing w/sripping around my window on the bottom and having trouble finding it. The product is black and hard rubber and slides down a track to keep it in place thank you for your help

Trying to find this seal for my certain teed vinyl windows

Hi - We purchased weatherstripping under order 2442358. The 1/4" worked well however the 5/8" we purchased was WAY off. (we obviously were not thinking on that size). As you can see from the 1st picture, we believe the size we need is 1/2" however can't find it in your products. Can you verify o ... (cont.)

I am look for similar bottom jalousie window frame seal. What I have is broken and brittle.I have attached a picture and will need 27'Thanks, Mark

Need exterior weather stripping to fit T-channel

I need this bulb seal. What size is it. The slotted bottom is 3/16 and diameter is approximately 1/4 maybe bigger

I need to replace a broken Caldwell block and tackle for the subject window identification on the broken on shows Caldwell 28-3 EN. Could you please let me know the replacement Block and Tackle to order

I would like to replace all this base trim on all of my windows. I have not found it yet to just slide out the old and slide in the new seal.

T-slot width is 1/8 of an inch...bulb size is 1/4 inch or slightly larger (5/16 would work).

I'm having a hard time locating this window weather stripping at a store. I think it's called T-hollow offset. Can I still get this type of weather stripping? If so, where?

Looking to replace damaged weatherstripping for certainteed windows installed approximately 1995.Pictures attached. I can send measurements if you have this type available.ThxJoe

Looking for this seal. It has a T shaped part that slides into the channel. The seal is foam filled vinyl covered. It is similar to your 58-200 seal except that the mount is T shaped and not kerf. The T measures 3/16".