Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

This seal is on the top of inner and bottom of outer. They join together when window is closed.

Hello, Attached are photos of a screen pin and a bottom weatherstripping from a united window double hung window. I see a similar screen pin that may work, but there isn't an exact match for the weatherstripping. I was hoping to put in an order of several feet of stripping and a few dozen pins ... (cont.)

looks like a 1/4 filled tube 7/116 plastic face with a 3/16 T spline

Need help finding a foam seal replacement on a viwintech window. I believe it was held on by adhesive. Thanks for the help!

Hi Looking to replace old seal for bottom sash of Alside window Model 0201 Excalibur dbl hung

I've got a bunch of 20 year old vinyl windows that are in good shape excep for the bubble seal at bottom Total height looks to be 1/2 inch Bubble looks to be 3/8 or possibly 1/4 inch Help me Obi Wan. Your my only hope

Looking for weatherstripping for Alliance windows.

The bubble is 1/4" and the leg is 5/8" What replacement part should I buy? I have a lot of windows to repair. Thanks Mike G

I have no knowledge of the age or manufacturer of my vinyl replacement windows but am searching for replacement seals for the horizontal sash.

Looking to replace weather strips on vinyl windows. Windows are approx 20 years old. Unable to identify manufacturer.

This pic is my old weatherseal next to the one I recently ordered from Swisco (58-182). The foam bulb is slightly smaller than the one I am replacing. So I believe I need to return 58-182 & order 58-183

I am interested in possibly replacing a broken pivot lock shoe and the weather strip on a MI double hung vinyl window. The window is approximately twenty years old. Please advise.Thank you for any help you can offer,Jim

Could you verify that this is a 0.187 T-Slot Foam Filled Bulb Weatherseal? It is from an older window (2005)It was damaged and this is the best profile I can manage.

Hi , need 40 ft Thanks

Windows installed about 2001. I see no names or manufacturer anywhere. Except on handle assembly it says "deal". Let me know what type of weather seal would be direct replacement. Happy to resend different pics or measurements if needed.Sean

I need the bottom bulb seals for my MI Windows. Please call or email with any questions...Thanks,

Would you please advise if you have a replacement for this weather seal for my vinyl windows? It measures 1/2" (facing) and then another 1/2" underneath.Thankyou in anticipation of your assitance,With Kind Regards,Patricia

HELP!What I ordered was 10 packs of 58-171 but the bulb seems to smaller as well as the T. I have only used one pack.Thank You,Jimmy

Looked through your site, didn't see anything I could use Any ideas? Thanks for your help.

looking to see if you have the vinyl insert with the rubber gasket for GRW. Quite old over 35 years old. If you do have them,I will email you the size and number of strips needed. It is not the felt stripping. I believe I have to loosen about 6-8 screws in the frame to slide this in. thanks den ... (cont.)