Viewing all customer Discussions for:

58-182 .187 T-Slot Foam Filled Bulb Weatherseal,12ft

Looks more like the.187 style or the .270 T- Slot foam filled, can you confirm? T measures approximately 3/16 of an inch, thank you! Chip

Seal for the bottom of my window. Not sure what would be the best replacement. Thank you.

Believe i need a bulb seal. This from Craftsman 8500 series window. Please advise proper part number so I can order.Also, if there is other seals I should consider for this window, please advise. Thank you,Tim

looking for the offside T-slot part attached in the pictures. Alside double hungs window - SN: 111-705767

What should outdoor temperature be when replacing Swisco weatherstripping on Certainteed windows?

I believe the correct part is 58-182 but would like your confirmation. Attached are photos. Thank you,John

This is a 20 year old Alliance Window. Not sure if I need 58-171 or 58-182

This slips in the bottom of the sash on a single hung tilt window.

I have 5 (five) 40" double hung (double tilt in) windows. We installed them new in late 90's, we think. The bottom sash on one window has a bubble seal on it. As near as I can figure, it is 58-156 for replacement. However, the other 4 windows do not have the side opening where you would slide the pa ... (cont.)

I am looking to replace weatherstripping for old certainteed windows. I tried 58-164 and 58-171. The T-Slot is 3/16". I am having trouble with the bubble/foam part being too large and the windows will not close properly. Any suggestions will be helpful. Thanks!

I need the bulb seal for the bottom of an MI S-4300 single hung window. I have attached pictures.

Hello,I hope the photos help figure out what weather stripping I need.Emmett

I believe part 58-182 looks to be the match, My T-slot is 3/16, overall length is 13/16, and the foam ball is 5/16, which all look to match this product. I need 100'.

looking to replace these in the house. which part number would fit? does it come in a roll or what? is shipping cost significant?

These are not wood window frames - I believe them to be vinyl. Need the weatherstripping as mine is effectively disintegrating.

33 1/2 inches window width The bubble seal was about 3/4" see pics with ruler for reference, best I could do.

Need to confirm. My photo looks slightly different from pictures on your site. The weatherstripping I have is a .187 t-slot. However, the foam bulb is closer to 3/8 inch or .375 diameter. In addition it appears an angled piece comes off the picture you posted, versus no angular piece on my weath ... (cont.)

Bottom of window weatherstrip. Foam filled. 41 inches long

The bottom seal for all the windows in the house have dried out and or disintegrated. Photo depicts profile. Windows are approx 20 years old.

I have single hung MI windows 8500 series that were installed when my home was built in 2001. The bulb seals on the bottom sash of my windows is deteriorating and crumbling. MI company gave me your name/ website, but did not help me determine which of your products to order or how the product is i ... (cont.)