Viewing all customer Discussions for:

39-410 Ware Window Crank, LH

I don't see any markings on the crank nor the windows themselves. I'm looking for replacements for both left and right.

Unfortunately there are no markings on the crank that I took off. The connecting hole is 3/8" diameter and connects to the window linkage via an "E" clip. Note the slight offset in the connecting link. There are several cranks that need replacing but I would like to start with one just to make su ... (cont.)

I need several awning window operators, both LH and RH. I'm attaching a sketch with dimensions I believe are important and photos of an existing LH operator from several angles. I cannot find any identification on the windows or the operators. I thought 39-016 would be close, but it is not quite. ... (cont.)

This looks like the Pan am/Daryl operator except the two wholes to the bottom on.mine are One inch from center not

awning window operator with only two mounting holes. All help appreciated identifying.

I need a replacement crank. Do you have any like this?

looking for the right part.

Good morning. I'm restoring the original windows in my new home. Most important part I need is the bracket, which has a broken tab. It's about 5" in length.Judging by the another set of holes in the frame the crank might not be original. I might need one going forward as I've only started with th ... (cont.)

Bought an old house built in 1959. Previous owner removed all the window handles and left only this one. trying to find replacements.

Need replacements for old window cranks. House is old and nothing is standard. Can't identify manufacturer, although Swisco seems to be very close, if not it exactly. Crank base has the following part no engraved inside: PT NO 10-9231-LH-4.

I am looking for a few cranks that, There is no product company names, numbers, or markings. There are a few in which there are 4 screws in total and some that have one on top and two on the bottom. If you can provide me with information in which there could be a similar product in your store. ... (cont.)

alcan window probably 30 years old 2 5/16 depth 5 3/4 height includes mounting area 7/8 width not including mount

I have a right and a left one that needs to be replaced.Both are the same size just a right and a left

Time ago I saw in the internet that this operators might work for marva security windows Theses are the pictures I have of that actual operator. Unfortunately, they are all rusted and I cannot see any numbers in any of the parts. The height is 4 1/2 inches and at the center, the width is a little le ... (cont.)

need to replace mine. i have a "RUSCO", with paton number: 2732.727. . there is no other numbers on product. I have no idea how old my crank is. I have pictures of crank but I dont see a way to send it to you. Marla

I am trying to find the proper replacement awning window operators. They look similar to 39-026 but a couple of differences the attaching arm is 2 1/2 inches long and it has a 3/8 hole which had a plastic sleeve . The arm has a slight offset. The windows were manufactured by Marva in Puerto Rico bac ... (cont.)

We measured the crank and the dimensions match up except for the bottom two holes, which on your diagram is 7/8" but is wider (1 1/4") on ours. However I don't think that will be an issue since that is just a matter of making a different hole if needed. To clear my confusion, is ours the RH or LH ... (cont.)

Hello! Please quote 20 rigth and 20 left window crank operators replacements for the Marva windows. Attached there are two pictures of the windows cranck operators I have installed at home. Thanks, Evelinda

I'm trying to find a crank or crank assembly for this window. Please see picture for identyfying.

The only markings are inside the crank and there is a number 2 stamped for the right hand crank. The left hand crank has the letter "L" and the number "1" stamped inside of it. The measurements are the same as your item # 39-410, the left hand crank of which I need five (5) units. The only differenc ... (cont.)